SSHFA200 21 Part by Monogram Aerospace Fasteners Inc with NSN 5320-01-027-5355 - Request a Quote Now

Part Number: SSHFA200 21

Manufacturer: monogram aerospace fasteners inc

NSN: 5320-01-027-5355

CAGE Code: 98524

NIIN: 010275355

Item Name : rivet blind

INC Code: 00864

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5320 Rivets

For competitive procurement options on part number SSHFA200 21 from Monogram Aerospace Fasteners Inc (CAGE Code 98524), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number SSHFA200 21 Details:

Part number SSHFA200 21 is manufactured by Monogram Aerospace Fasteners Inc and listed with the item name Rivet Blind. Classified under NSN 5320-01-027-5355, the NIIN of this item is 010275355, its INC is 00864, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5320 Rivets. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SSHFA200 21

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part SSHFA200 21 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number SSHFA200 21 with NSN 5320-01-027-5355, 5320010275355

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5320-01-027-5355 Item PartTypeName: RIVET,BLIND	5320	010275355		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
BDRF6-21	2	9	5

Characteristics Data of NSN 5320-01-027-5355, 5320010275355

MRC	Criteria	Characteristic
AASK	HEAD STYLE	HEXAGON COUNTERSUNK
AASU	HEAD HEIGHT	0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM
AAZE	SHANK DIAMETER	0.197 INCHES MINIMUM AND 0.199 INCHES MAXIMUM
AAZF	SHANK STYLE	THREADED SELF-PLUGGING SHANK W/SLEEVE
ABAF	EXPANSION DEVICE	THREADED MANDREL
ANEE	GRIP LENGTH	1.282 INCHES MINIMUM AND 1.344 INCHES MAXIMUM
ASDB	WIDTH ACROSS FLATS	0.332 INCHES MINIMUM AND 0.346 INCHES MAXIMUM
CQFM	HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM BOLT
CRSQ	COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
MATT	MATERIAL	ALUMINUM ALLOY 7075 NUT
MATT	MATERIAL	STEEL COMP 304 OR STEEL COMP 303 OR STEEL COMP 303F SLEEVE
MATT	MATERIAL	STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 BOLT
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE BOLT
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE NUT
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR AMS 5639 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OR AMS 5641 ASSN STD 3RD MATERIAL RESPONSE SLEEVE
SFTT	SURFACE TREATMENT	ANODIZE NUT
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE AND PASSIVATE SLEEVE
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE BOLT
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE NUT
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL2 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE SLEEVE
ZZZK	SPECIFICATION/STANDARD DATA	80205-NAS1674 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD