SS4P Part by Mpb Corporation with NSN 3110-00-293-8375 - Request a Quote Now

Part Number: SS4P

Manufacturer: mpb corporation

NSN: 3110-00-293-8375

CAGE Code: 40920

NIIN: 002938375

Item Name : bearing ball pivot

INC Code: 18032

Country: USA

NCB Code: 00

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number SS4P from Mpb Corporation (CAGE Code 40920), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number SS4P Details:

Part number SS4P is manufactured by Mpb Corporation and listed with the item name Bearing Ball Pivot. Classified under NSN 3110-00-293-8375, the NIIN of this item is 002938375, its INC is 18032, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SS4P

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part SS4P with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 3110-00-293-8375, 3110002938375

MRC	Criteria	Characteristic
ABMK	OVERALL WIDTH	0.0945 INCHES NOMINAL
ADGA	OVERALL OUTSIDE DIAMETER	0.1575 INCHES NOMINAL
AGWH	ROLLING ELEMENT DIAMETER	0.0468 INCHES NOMINAL
AGZA	ALIGNMENT TYPE	SELF-ALIGNING
AGZC	LOAD DIRECTION	ANGULAR
AGZT	BEARING BALL QUANTITY	4
AHAW	SELF-ALIGNMENT LOCATION	INTERNAL
CSKC	TAPER ANGLE	60.00 DEGREES NOMINAL
FEAT	SPECIAL FEATURES	RETAINMENT PLATE L SHAPED
MATT	MATERIAL	STEEL CORROSION RESISTING OVERALL
STYL	STYLE DESIGNATOR	MACHINED OUTER RING, CLOSED END, NON-SEPARABLE