S2-1-2FCE Part by Mpb Corporation with NSN 3110-00-801-7006 - Request a Quote Now

Part Number: S2-1-2FCE

Manufacturer: mpb corporation

NSN: 3110-00-801-7006

CAGE Code: 40920

NIIN: 008017006

Item Name : bearing ball annular

INC Code: 00014

Country: USA

NCB Code: 00

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number S2-1-2FCE from Mpb Corporation (CAGE Code 40920), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number S2-1-2FCE Details:

Part number S2-1-2FCE is manufactured by Mpb Corporation and listed with the item name Bearing Ball Annular. Classified under NSN 3110-00-801-7006, the NIIN of this item is 008017006, its INC is 00014, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for S2-1-2FCE

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part S2-1-2FCE with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number S2-1-2FCE with NSN 3110-00-801-7006, 3110008017006

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-00-801-7006 Item PartTypeName: BEARING,BALL,ANNULAR	3110	008017006	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
048488	2	2	7

Characteristics Data of NSN 3110-00-801-7006, 3110008017006

MRC	Criteria	Characteristic
ABXV	BORE DIAMETER	0.0467 INCHES MINIMUM AND 0.0469 INCHES MAXIMUM
AGVV	OUTER RING OUTSIDE DIAMETER	0.1560 INCHES MINIMUM AND 0.1562 INCHES MAXIMUM
AKVV	INTERNAL CLEARANCE	0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL
MATT	MATERIAL	STEEL CORROSION RESISTING OVERALL
AEPR	FLANGE OUTSIDE DIAMETER	0.2030 INCHES NOMINAL
AGFF	FLANGE WIDTH	0.0130 INCHES NOMINAL
AGVT	OUTER RING WIDTH	0.0625 INCHES NOMINAL
AGVU	INNER RING WIDTH	0.0927 INCHES MINIMUM
AGYE	SURFACE FINISH	GROUND
AGYF	RETAINER FABRICATION METHOD	PRESSED
AGZC	LOAD DIRECTION	RADIAL
AGZD	BORE SHAPE	STRAIGHT
FEAT	SPECIAL FEATURES	INNER RING RADIAL RUNOUT 0.0001 IN. AND OUTER RING RADIAL RUNOUT 0.0002 IN.
STYL	STYLE DESIGNATOR	NON-LOADING GROOVE,NON-SEPARABLE