AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number MKP16B-010M from Mpb Corporation (CAGE Code 40920), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number MKP16B-010M Details:
Part number MKP16B-010M is manufactured by Mpb Corporation and listed with the item name Bearing Ball Airframe. Classified under NSN 3110-01-465-3321, the NIIN of this item is 014653321, its INC is 00041, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-465-3321 Item PartTypeName: BEARING,BALL,AIRFRAME | 3110 | 014653321 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 38950-00908 | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABXV | BORE DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.7495 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM |
| ADZG | LUBRICATION MATERIAL | GREASE |
| AGAV | END ITEM IDENTIFICATION | HELICOPTER, LAMPS MARK III, SH-60B |
| AGVT | OUTER RING WIDTH | 0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.4345 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZC | LOAD DIRECTION | RADIAL |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| AKVV | INTERNAL CLEARANCE | 0.0001 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PRECISION BEARING RADIAL TORQUE TUBE TYPE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC 1ST MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS3652 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6440 ASSN STD SINGLE MATERIAL RESPONSE BALL OR AMS6444 ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6440 ASSN STD SINGLE MATERIAL RESPONSE INNER RING OR AMS6444 ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6440 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING OR AMS6444 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SINGLE ROW, TORQUE TUBE TYPE, W/OR W/O CLOSURE |
| ABXV | BORE DIAMETER | 0.9995 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.7495 INCHES MINIMUM AND 1.7500 INCHES MAXIMUM |
| ADZG | LUBRICATION MATERIAL | GREASE |
| AGAV | END ITEM IDENTIFICATION | HELICOPTER, LAMPS MARK III, SH-60B |
| AGVT | OUTER RING WIDTH | 0.3700 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.4345 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZC | LOAD DIRECTION | RADIAL |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| AKVV | INTERNAL CLEARANCE | 0.0001 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PRECISION BEARING RADIAL TORQUE TUBE TYPE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC 1ST MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS3652 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6440 ASSN STD SINGLE MATERIAL RESPONSE BALL OR AMS6444 ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6440 ASSN STD SINGLE MATERIAL RESPONSE INNER RING OR AMS6444 ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6440 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING OR AMS6444 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SINGLE ROW, TORQUE TUBE TYPE, W/OR W/O CLOSURE |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
