NA0038-030012 Part by National Aerospace Standards Com with NSN 5305-01-438-2365 - Request a Quote Now

Part Number: NA0038-030012

Manufacturer: national aerospace standards com

NSN: 5305-01-438-2365

CAGE Code: 80205

NIIN: 014382365

Item Name : screw close toleran

INC Code: 29294

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5305 Screws

For competitive procurement options on part number NA0038-030012 from National Aerospace Standards Com (CAGE Code 80205), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number NA0038-030012 Details:

Part number NA0038-030012 is manufactured by National Aerospace Standards Com and listed with the item name Screw Close Toleran. Classified under NSN 5305-01-438-2365, the NIIN of this item is 014382365, its INC is 29294, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5305 Screws. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for NA0038-030012

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part NA0038-030012 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number NA0038-030012 with NSN 5305-01-438-2365, 5305014382365

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-01-438-2365 Item PartTypeName: SCREW,CLOSE TOLERANCE	5305	014382365	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
NA0038-030012	5	2	3

Characteristics Data of NSN 5305-01-438-2365, 5305014382365

MRC	Criteria	Characteristic
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	6.0 MILLIMETERS NOMINAL"
AASB	FASTENER LENGTH	18.0 MILLIMETERS NOMINAL"
AASK	HEAD STYLE	FLAT COUNTERSUNK UNDERCUT"
AASL	HEAD DIAMETER	5.4 MILLIMETERS MINIMUM AND 6.0 MILLIMETERS MAXIMUM"
AASU	HEAD HEIGHT	1.27 MILLIMETERS NOMINAL"
AAUR	GRIP DIAMETER	2.965 MILLIMETERS MINIMUM AND 2.990 MILLIMETERS MAXIMUM"
ABQZ	INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)"
AHYM	NOMINAL THREAD DIAMETER	3.0 MILLIMETERS"
ANEE	GRIP LENGTH	12.0 MILLIMETERS NOMINAL"
CQQR	THREAD PITCH IN MILLIMETERS	0.5"
CQWR	EXTERNAL THREAD TOLERANCE CLASS	4H6H"
CRSQ	COUNTERSINK ANGLE	95.0 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM"
MATT	MATERIAL	STEEL OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	NA0006 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"
SFTT	SURFACE TREATMENT	CHROMATE OVERALL AND CADMIUM OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416, TY 2, CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL"
THSD	THREAD SERIES DESIGNATOR	MJ"
ZZZK	SPECIFICATION/STANDARD DATA	80205-NA0038 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD"
AAJF	THREAD DIRECTION	RIGHT-HAND"
AASA	THREAD LENGTH	6.0 MILLIMETERS NOMINAL"
AASB	FASTENER LENGTH	18.0 MILLIMETERS NOMINAL"
AASK	HEAD STYLE	FLAT COUNTERSUNK UNDERCUT"
AASL	HEAD DIAMETER	5.4 MILLIMETERS MINIMUM AND 6.0 MILLIMETERS MAXIMUM"
AASU	HEAD HEIGHT	1.27 MILLIMETERS NOMINAL"
AAUR	GRIP DIAMETER	2.965 MILLIMETERS MINIMUM AND 2.990 MILLIMETERS MAXIMUM"
ABQZ	INTERNAL DRIVE STYLE	OFFSET CRUCIFORM (TORQUE SET)"
AHYM	NOMINAL THREAD DIAMETER	3.0 MILLIMETERS"
ANEE	GRIP LENGTH	12.0 MILLIMETERS NOMINAL"
CQQR	THREAD PITCH IN MILLIMETERS	0.5"
CQWR	EXTERNAL THREAD TOLERANCE CLASS	4H6H"
CRSQ	COUNTERSINK ANGLE	95.0 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM"
MATT	MATERIAL	STEEL OVERALL"
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	NA0006 ASSN STD SINGLE MATERIAL RESPONSE OVERALL"
SFTT	SURFACE TREATMENT	CHROMATE OVERALL AND CADMIUM OVERALL"
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416, TY 2, CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL"
THSD	THREAD SERIES DESIGNATOR	MJ"
ZZZK	SPECIFICATION/STANDARD DATA	80205-NA0038 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD"