CB 12 RA Part by National Instruments Corporation with NSN 3120-01-004-7031 - Request a Quote Now

Part Number: CB 12 RA

Manufacturer: national instruments corporation

NSN: 3120-01-004-7031

CAGE Code: 03950

NIIN: 010047031

Item Name : bearing plain self aligning

INC Code: 13208

Country: USA

NCB Code: 01

FSG: 31 Bearings

FSC: 3120 Bearings Plain Unmounted

For competitive procurement options on part number CB 12 RA from National Instruments Corporation (CAGE Code 03950), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number CB 12 RA Details:

Part number CB 12 RA is manufactured by National Instruments Corporation and listed with the item name Bearing Plain Self Aligning. Classified under NSN 3120-01-004-7031, the NIIN of this item is 010047031, its INC is 13208, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3120 Bearings Plain Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CB 12 RA

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part CB 12 RA with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number CB 12 RA with NSN 3120-01-004-7031, 3120010047031

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-01-004-7031 Item PartTypeName: BEARING,PLAIN,SELF-ALIGNING	3120	010047031	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
CB 12 RA	2	1	C			A

Characteristics Data of NSN 3120-01-004-7031, 3120010047031

MRC	Criteria	Characteristic
ABXV	BORE DIAMETER	0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM
AGGF	OUTER MEMBER OUTSIDE DIAMETER	1.8745 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM
AGGH	OUTER MEMBER WIDTH	0.6820 INCHES MINIMUM AND 0.6920 INCHES MAXIMUM
AGGJ	INNER MEMBER WIDTH	0.8700 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM
AGKP	STATIC RADIAL LOAD RATING	6560 POUNDS
MATT	MATERIAL	COPPER ALLOY INNER MEMBER
MATT	MATERIAL	STEEL OUTER RACE MEMBER
MATT	MATERIAL	STEEL RACE INSERT
SFTT	SURFACE TREATMENT	CADMIUM OUTSIDE DIAMETER SURFACE OF BODY
STYL	STYLE DESIGNATOR	WITH INSERT AND/OR LINER