STD.2192-D-95 Part by National Instruments Corporation with NSN 5306-01-104-1059 - Request a Quote Now

Part Number: STD.2192-D-95

Manufacturer: national instruments corporation

NSN: 5306-01-104-1059

CAGE Code: 03950

NIIN: 011041059

Item Name : bolt close tolerance

INC Code: 27851

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5306 Bolts

For competitive procurement options on part number STD.2192-D-95 from National Instruments Corporation (CAGE Code 03950), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number STD.2192-D-95 Details:

Part number STD.2192-D-95 is manufactured by National Instruments Corporation and listed with the item name Bolt Close Tolerance. Classified under NSN 5306-01-104-1059, the NIIN of this item is 011041059, its INC is 27851, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5306 Bolts. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for STD.2192-D-95

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part STD.2192-D-95 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number STD.2192-D-95 with NSN 5306-01-104-1059, 5306011041059

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5306-01-104-1059 Item PartTypeName: BOLT,CLOSE TOLERANCE	5306	011041059	0	N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
STD.2192-D-95	5	2	3

Characteristics Data of NSN 5306-01-104-1059, 5306011041059

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.272 INCHES MINIMUM AND 0.282 INCHES MAXIMUM
AASB	FASTENER LENGTH	1.285 INCHES MINIMUM AND 1.295 INCHES MAXIMUM
AASK	HEAD STYLE	HEXAGON
AASU	HEAD HEIGHT	0.135 INCHES MINIMUM AND 0.145 INCHES MAXIMUM
AATB	WIDTH BETWEEN FLATS	0.339 INCHES MINIMUM AND 0.344 INCHES MAXIMUM
AAUB	HOLE DIAMETER	0.062 INCHES NOMINAL
AAUR	GRIP DIAMETER	0.1900 INCHES MINIMUM AND 0.1905 INCHES MAXIMUM
AHYM	NOMINAL THREAD DIAMETER	0.190 INCHES
ANEE	GRIP LENGTH	0.950 INCHES MINIMUM AND 1.013 INCHES MAXIMUM
ASXK	HOLE QUANTITY	1
BQDM	HOLE TYPE	DRILLED
CMLP	THREAD QUANTITY PER INCH	32
CRHC	HOLE CONFIGURATION STYLE	HEXAGON FLATS
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
MATT	MATERIAL	STEEL CORROSION RESISTING OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	5.80B FSCM 56387 MFR REF SINGLE MATERIAL RESPONSE OVERALL
THSD	THREAD SERIES DESIGNATOR	UNF