8Z1000PC10 Part by Navair And Navsea Managed with NSN 5305-00-271-6480 - Request a Quote Now

Part Number: 8Z1000PC10

Manufacturer: navair and navsea managed

NSN: 5305-00-271-6480

CAGE Code: 10001

NIIN: 002716480

Item Name : screw machine

INC Code: 06657

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

FSC: 5305 Screws

For competitive procurement options on part number 8Z1000PC10 from Navair And Navsea Managed (CAGE Code 10001), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 8Z1000PC10 Details:

Part number 8Z1000PC10 is manufactured by Navair And Navsea Managed and listed with the item name Screw Machine. Classified under NSN 5305-00-271-6480, the NIIN of this item is 002716480, its INC is 06657, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5305 Screws. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 8Z1000PC10

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 8Z1000PC10 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 8Z1000PC10 with NSN 5305-00-271-6480, 5305002716480

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-00-271-6480 Item PartTypeName: SCREW,MACHINE	5305	002716480	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
8Z1000PC10	2	2	3

Characteristics Data of NSN 5305-00-271-6480, 5305002716480

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM
AASB	FASTENER LENGTH	0.639 INCHES NOMINAL
AASK	HEAD STYLE	FLAT COUNTERSUNK
AASL	HEAD DIAMETER	0.407 INCHES MINIMUM AND 0.413 INCHES MAXIMUM
ABQZ	INTERNAL DRIVE STYLE	CROSS RECESS TYPE 1
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES
CMLP	THREAD QUANTITY PER INCH	20
CRSQ	COUNTERSINK ANGLE	60.0 DEGREES NOMINAL
CYAU	SCREW MATERIAL	STEEL COMP 1115 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1120
THSD	THREAD SERIES DESIGNATOR	UNC