75340011657652 Part by Naval Inventory Control Point with NSN 5340-01-325-5359 - Request a Quote Now

Part Number: 75340011657652

Manufacturer: naval inventory control point

NSN: 5340-01-325-5359

CAGE Code: 80132

NIIN: 013255359

Item Name : bracket angle

INC Code: 16900

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5340 Hardware Commercial

For competitive procurement options on part number 75340011657652 from Naval Inventory Control Point (CAGE Code 80132), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 75340011657652 Details:

Part number 75340011657652 is manufactured by Naval Inventory Control Point and listed with the item name Bracket Angle. Classified under NSN 5340-01-325-5359, the NIIN of this item is 013255359, its INC is 16900, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5340 Hardware Commercial. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 75340011657652

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 75340011657652 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 75340011657652 with NSN 5340-01-325-5359, 5340013255359

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-325-5359 Item PartTypeName: BRACKET,ANGLE	5340	013255359	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
70205-06052-119	5	2	5

Characteristics Data of NSN 5340-01-325-5359, 5340013255359

MRC	Criteria	Characteristic
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.310 INCHES NOMINAL
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	ONE HOLE
ACHY	MOUNTING HOLE TYPE	PLAIN
AHLG	SECOND LEG CORNER RADIUS	0.250 INCHES NOMINAL
AHLN	SECOND LEG HOLE DIAMETER	0.205 INCHES NOMINAL
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL
STYL	STYLE DESIGNATOR	ANGLE
ADLK	FIRST LEG LENGTH	0.620 INCHES NOMINAL
AHLF	SECOND LEG WIDTH	0.880 INCHES NOMINAL
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.440 INCHES NOMINAL
AHPW	FIRST LEG THICKNESS	0.050 INCHES NOMINAL
AHQN	FIRST LEG WIDTH	0.880 INCHES NOMINAL
AHQP	FIRST LEG CORNER RADIUS	0.250 INCHES NOMINAL
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
MATT	MATERIAL	ALUMINUM ALLOY 6061
ADLL	SECOND LEG LENGTH	1.120 INCHES NOMINAL
AHPX	SECOND LEG THICKNESS	0.050 INCHES NOMINAL
AJZU	FIRST LEG STYLE	CORNER RADIUS
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	NO HOLE
AKBU	SECOND LEG STYLE	CORNER RADIUS
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/11 T6 FED SPEC SINGLE MATERIAL RESPONSE