SR3PPC18W Part by New Hampshire Ball Bearings Inc with NSN 3110-00-902-1041 - Request a Quote Now

Part Number: SR3PPC18W

Manufacturer: new hampshire ball bearings inc

NSN: 3110-00-902-1041

CAGE Code: 83086

NIIN: 009021041

Item Name : bearing ball annular

Country: USA

NCB Code: 00

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number SR3PPC18W from New Hampshire Ball Bearings Inc (CAGE Code 83086), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number SR3PPC18W Details:

Part number SR3PPC18W is manufactured by New Hampshire Ball Bearings Inc and listed with the item name Bearing Ball Annular. Classified under NSN 3110-00-902-1041, the NIIN of this item is 009021041, its INC is , and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SR3PPC18W

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part SR3PPC18W with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 3110-00-902-1041, 3110009021041

MRC	Criteria	Characteristic
STYL	STYLE DESIGNATOR	NON-LOADING GROOVE, NON-SEPARABLE
ABMK	OVERALL WIDTH	0.1562 INCHES NOMINAL
CTFZ	STANDARD TOLERANCE DESIGNATION	ABEC NO.7
ABXV	BORE DIAMETER	0.1875 INCHES NOMINAL
ADGA	OVERALL OUTSIDE DIAMETER	0.5000 INCHES NOMINAL
SR-5	MANUFACTURERS CODE	35351
AGYE	SURFACE FINISH	GROUND
AGYF	RETAINER FABRICATION METHOD	PRESSED
AGYK	SHIELD QUANTITY	2
AGZC	LOAD DIRECTION	RADIAL
AGZD	BORE SHAPE	STRAIGHT
AKVV	INTERNAL CLEARANCE	0.0001 INCHES MINIMUM RADIAL AND 0.0002 INCHES MAXIMUM RADIAL
ADZG	LUBRICATION MATERIAL	OIL
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-L-6085 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	STEEL BALL STEEL INNER RING STEEL OUTER RING STEEL RETAINER STEEL CORROSION RESISTING SHIELD
SR-5	THE MANUFACTURERS DATA
SR-5	DESIGN CONTROL REFERENCE	141545-01