SSR4ZDF4RA7P58LY-48 Part by New Hampshire Ball Bearings Inc with NSN 3110-01-016-4961 - Request a Quote Now

Part Number: SSR4ZDF4RA7P58LY-48

Manufacturer: new hampshire ball bearings inc

NSN: 3110-01-016-4961

CAGE Code: 50294

NIIN: 010164961

Item Name : bearing ball duplex

INC Code: 30213

Country: USA

NCB Code: 01

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number SSR4ZDF4RA7P58LY-48 from New Hampshire Ball Bearings Inc (CAGE Code 50294), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number SSR4ZDF4RA7P58LY-48 Details:

Part number SSR4ZDF4RA7P58LY-48 is manufactured by New Hampshire Ball Bearings Inc and listed with the item name Bearing Ball Duplex. Classified under NSN 3110-01-016-4961, the NIIN of this item is 010164961, its INC is 30213, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SSR4ZDF4RA7P58LY-48

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part SSR4ZDF4RA7P58LY-48 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number SSR4ZDF4RA7P58LY-48 with NSN 3110-01-016-4961, 3110010164961

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-01-016-4961 Item PartTypeName: BEARING,BALL,DUPLEX	3110	010164961	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
1936137-2	2	2	3

Characteristics Data of NSN 3110-01-016-4961, 3110010164961

MRC	Criteria	Characteristic
ABMK	OVERALL WIDTH	0.3788 INCHES MINIMUM AND 0.3938 INCHES MAXIMUM
ABXV	BORE DIAMETER	0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	0.6248 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
ADZG	LUBRICATION MATERIAL	GREASE
AGYC	CALIBRATION DESIGNATOR	C
AGYE	SURFACE FINISH	GROUND
AGYF	RETAINER FABRICATION METHOD	PRESSED
AGYK	SHIELD QUANTITY	2
AGZC	LOAD DIRECTION	ANGULAR
AKVV	INTERNAL CLEARANCE	0.0008 INCHES MINIMUM RADIAL AND 0.0013 INCHES MAXIMUM RADIAL
CTFZ	STANDARD TOLERANCE DESIGNATION	ABEC NO.7
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	STEEL COMP 440A OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
STYL	STYLE DESIGNATOR	COUNTERBORED OUTER RINGS,NON-SEPARABLE,FACE TO FACE MOUNTING