NMC3600 20 Part by Nmc Group Inc with NSN 5340-01-317-0677 - Request a Quote Now

Part Number: NMC3600 20

Manufacturer: nmc group inc

NSN: 5340-01-317-0677

CAGE Code: 03296

NIIN: 013170677

Item Name : clamp loop

INC Code: 17532

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5340 Hardware Commercial

For competitive procurement options on part number NMC3600 20 from Nmc Group Inc (CAGE Code 03296), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number NMC3600 20 Details:

Part number NMC3600 20 is manufactured by Nmc Group Inc and listed with the item name Clamp Loop. Classified under NSN 5340-01-317-0677, the NIIN of this item is 013170677, its INC is 17532, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5340 Hardware Commercial. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for NMC3600 20

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part NMC3600 20 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number NMC3600 20 with NSN 5340-01-317-0677, 5340013170677

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-317-0677 Item PartTypeName: CLAMP,LOOP	5340	013170677		P	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
			A	U	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
0P633-20	5	9	5

Characteristics Data of NSN 5340-01-317-0677, 5340013170677

MRC	Criteria	Characteristic
ABMZ	DIAMETER	0.199 INCHES MINIMUM AND 0.203 INCHES MAXIMUM
BZTN	LOOP INSIDE DIAMETER	1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM
ABMK	OVERALL WIDTH	0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM
ABPX	MATERIAL THICKNESS	0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
AZDC	DISTANCE FROM LOOP CENTER TO TONGUE END	1.325 INCHES NOMINAL
STYL	STYLE DESIGNATOR	SINGLE LOOP
AAAL	TONGUE HOLE TYPE	ROUND,UNTHREADED
MATT	MATERIAL	PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	ASTM D4066 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
AZCY	CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	1.104 INCHES MINIMUM AND 1.144 INCHES MAXIMUM