C74A4AKQP3RMG Part by Norgren Limited with NSN 4930-01-267-9525 - Request a Quote Now

Part Number: C74A4AKQP3RMG

Manufacturer: norgren limited

NSN: 4930-01-267-9525

CAGE Code: 43990

NIIN: 012679525

Item Name : filter lubricator a

INC Code: 50800

Country: USA

NCB Code: 01

FSG: 49 Maintenance and Repair Shop Equipment

FSC: 4930 Lubrication And Fuel Dispensing Equipment

For competitive procurement options on part number C74A4AKQP3RMG from Norgren Limited (CAGE Code 43990), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number C74A4AKQP3RMG Details:

Part number C74A4AKQP3RMG is manufactured by Norgren Limited and listed with the item name Filter Lubricator A. Classified under NSN 4930-01-267-9525, the NIIN of this item is 012679525, its INC is 50800, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 49 Maintenance and Repair Shop Equipment and Class (FSC) 4930 Lubrication And Fuel Dispensing Equipment. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for C74A4AKQP3RMG

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part C74A4AKQP3RMG with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 4930-01-267-9525, 4930012679525

MRC	Criteria	Characteristic
ASHZ	SPRAY TYPE	MICRO-FOG
CXNP	REGULATOR OUTLET PRESSURE RANGE	5.0 TO 125.0 POUNDS PER SQUARE INCH
AEHZ	MAXIMUM OPERATING TEMP	125.0 DEG FAHRENHEIT
ABLY	OIL RESERVOIR CAPACITY	8.0 OUNCES
SR-5	DESIGN CONTROL REFERENCE	C74A4AKQP3RMG
CQKX	AIR FLOW RATE	100.0 CUBIC FEET PER MINUTE MAXIMUM
APGF	DESIGN TYPE	THREE-PIECE
SR-5	MANUFACTURERS CODE	43990
SR-5	THE MANUFACTURERS DATA
AEVZ	MAXIMUM INLET PRESSURE RATING	150.0 POUNDS PER SQUARE INCH
ADNH	FILTRATION RATING IN MICRONS	50.0 NOMINAL
CYNC	BOWL MATERIAL	PLASTIC POLYCARBONATE
CBBL	FEATURES PROVIDED	BOWL GUARD AND MANUAL DRAIN AND KNOB HANDLE PRESSURE ADJUSTMENT DEVICE