GW10F-8A Part by Northrop Grumman Systems Corporation with NSN 5310-01-133-5850 - Request a Quote Now

Part Number: GW10F-8A

Manufacturer: northrop grumman systems corporation

NSN: 5310-01-133-5850

CAGE Code: 26512

NIIN: 011335850

Item Name : washer recessed

INC Code: 15933

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5310 Nuts and Washers

For competitive procurement options on part number GW10F-8A from Northrop Grumman Systems Corporation (CAGE Code 26512), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number GW10F-8A Details:

Part number GW10F-8A is manufactured by Northrop Grumman Systems Corporation and listed with the item name Washer Recessed. Classified under NSN 5310-01-133-5850, the NIIN of this item is 011335850, its INC is 15933, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5310 Nuts and Washers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for GW10F-8A

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part GW10F-8A with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number GW10F-8A with NSN 5310-01-133-5850, 5310011335850

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-01-133-5850 Item PartTypeName: WASHER,RECESSED	5310	011335850	0	N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
GW10F-8A	5	2	3

Characteristics Data of NSN 5310-01-133-5850, 5310011335850

MRC	Criteria	Characteristic
AAUB	HOLE DIAMETER	0.501 INCHES MINIMUM AND 0.503 INCHES MAXIMUM
ABKV	OUTSIDE DIAMETER	0.812 INCHES NOMINAL
ABMD	RECESS DIAMETER	0.561 INCHES MINIMUM AND 0.583 INCHES MAXIMUM
ABPX	MATERIAL THICKNESS	0.080 INCHES NOMINAL
CQFM	HARDNESS RATING	33.0 ROCKWELL C MINIMUM AND 37.0 ROCKWELL C MAXIMUM
CSTM	RECESS ANGLE	90.0 DEGREES NOMINAL
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
HUES	COLOR	BROWN OVERALL
MATT	MATERIAL	STEEL COMP 4130 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-18729 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
STYL	STYLE DESIGNATOR	RECESSED
ZZZK	SPECIFICATION/STANDARD DATA	26512-GW10F MANUFACTURERS STANDARD