GSS11900C Part by Northrop Grumman Systems Corporation with NSN 5340-01-043-0197 - Request a Quote Now

Part Number: GSS11900C

Manufacturer: northrop grumman systems corporation

NSN: 5340-01-043-0197

CAGE Code: 26512

NIIN: 010430197

Item Name : clamp block section

INC Code: 39404

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5340 Hardware Commercial

For competitive procurement options on part number GSS11900C from Northrop Grumman Systems Corporation (CAGE Code 26512), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number GSS11900C Details:

Part number GSS11900C is manufactured by Northrop Grumman Systems Corporation and listed with the item name Clamp Block Section. Classified under NSN 5340-01-043-0197, the NIIN of this item is 010430197, its INC is 39404, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5340 Hardware Commercial. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for GSS11900C

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part GSS11900C with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number GSS11900C with NSN 5340-01-043-0197, 5340010430197

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-043-0197 Item PartTypeName: CLAMP,BLOCK,SECTION	5340	010430197	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
A51L21085-23	5	2	3

Characteristics Data of NSN 5340-01-043-0197, 5340010430197

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	3.250 INCHES NOMINAL
ABMK	OVERALL WIDTH	0.380 INCHES NOMINAL
ABTB	MOUNTING HOLE DIAMETER	0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM
ABTJ	MOUNTING HOLE QUANTITY	2
AFEC	DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH	0.188 INCHES NOMINAL
AXPC	CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES	2.375 INCHES NOMINAL
AZGM	MOUNTING FACILITY	UNTHREADED HOLE
BYGG	BLOCK HEIGHT	0.315 INCHES NOMINAL
CWTD	CLAMPING HOLE QUANTITY	2
CWWM	CLAMPING HOLE DIAMETER	0.190 INCHES NOMINAL SECOND HOLE
CWWM	CLAMPING HOLE DIAMETER	0.252 INCHES NOMINAL FIRST HOLE
CWXC	DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER	0.250 INCHES NOMINAL
CWXN	DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER	0.562 INCHES NOMINAL
CWXZ	CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES	2.344 INCHES NOMINAL
MATT	MATERIAL	PLASTIC
STYL	STYLE DESIGNATOR	RECTANGULAR