7A8-09536 REV D Part by Oldenburg Group Incorporated with NSN 6105-01-512-8752 - Request a Quote Now

Part Number: 7A8-09536 REV D

Manufacturer: oldenburg group incorporated

NSN: 6105-01-512-8752

CAGE Code: 34712

NIIN: 015128752

Item Name : motor alternating c

INC Code: 00530

Country: USA

NCB Code: 01

FSG: 61 Electric Wire and Power and Distribution Equipment

FSC: 6105 Motors Electrical

For competitive procurement options on part number 7A8-09536 REV D from Oldenburg Group Incorporated (CAGE Code 34712), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 7A8-09536 REV D Details:

Part number 7A8-09536 REV D is manufactured by Oldenburg Group Incorporated and listed with the item name Motor Alternating C. Classified under NSN 6105-01-512-8752, the NIIN of this item is 015128752, its INC is 00530, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 61 Electric Wire and Power and Distribution Equipment and Class (FSC) 6105 Motors Electrical. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 7A8-09536 REV D

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 7A8-09536 REV D with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 7A8-09536 REV D with NSN 6105-01-512-8752, 6105015128752

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
6105-01-512-8752 Item PartTypeName: MOTOR,ALTERNATING CURRENT	6105	015128752	0	N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10E906X347H2	5	9	3

Characteristics Data of NSN 6105-01-512-8752, 6105015128752

MRC	Criteria	Characteristic
AAJU	III OVERALL LENGTH	27.570 INCHES
AAJT	OVERALL HEIGHT	14.660 INCHES
AAJU	OVERALL LENGTH	27.570 INCHES
ABRR	KEYWAY WIDTH	0.500 INCHES NOMINAL SINGLE END
ABWV	SHAFT DIAMETER	1.875 INCHES NOMINAL SINGLE END
AGAV	END ITEM IDENTIFICATION	MOTOR,ELECTRIC,AC
AKPS	DUTY CYCLE	CONTINUOUS
AXCP	WINDING TYPE	INDUCTION-SQUIRREL CAGE
AXHR	MOUNTING FACILITY TYPE AND QUANTITY	8 UNTHREADED HOLE
BKPB	CURRENT RATING METHOD	LOCKED ROTOR
BKPQ	INCLOSURE SPECIFICATION	MIL-STD-108 AND COMMERCIAL
CNMM	FRAME SIZE DESIGNATION	286T
CWCS	LENGTH OF SHAFT FROM HOUSING	4.380 INCHES SINGLE END
CWDY	TEMP RATING	50.0 AMBIENT DEG CELSIUS
CWFX	ROTOR SPEED RATING IN RPM	1768.0 SINGLE FULL LOAD
CWGQ	CONNECTION TYPE AND VOLTAGE RATING IN VOLTS	440.0 LINE TO NEUTRAL HIGH INPUT
FAAZ	PHASE	THREE INPUT
FREQ	FREQUENCY IN HERTZ	60.0 INPUT
SUPP	SUPPLEMENTARY FEATURES	INSULATION CLASS F
AAJV	OVERALL WIDTH	20.220 INCHES
ABRV	KEYWAY DEPTH	0.938 INCHES NOMINAL SINGLE END
AFYS	KEYWAY LENGTH	3.250 INCHES NOMINAL SINGLE END
AKCT	SHAFT ROTATION DIRECTION	CLOCKWISE SINGLE END
ANPZ	INCLOSURE FEATURE	TOTALLY INCLOSED AND WATERTIGHT
AXGY	MOUNTING METHOD	FIXED BASE AND FACE
BFMF	COOLING METHOD	FAN COOLED
BKPH	TORQUE RATING AND TYPE	148.0 FOOT-POUNDS RUNNING
CBBL	FEATURES PROVIDED	HORIZONTAL MOUNTING POSITION
CNXS	POWER RATING	30.000 HORSEPOWER INPUT
CWDM	SHAFT CENTER TO MOUNTING SURFACE DISTANCE	7.000 INCHES SINGLE END
CWFQ	MOUNTING FACILITY CIRCLE DIAMETER	15.320 INCHES
CWGL	CURRENT RATING IN AMPS	217.000 HIGH INPUT
CWHZ	SHAFT END CHARACTERISTIC	A9 SINGLE STYLE SINGLE END
FEAT	SPECIAL FEATURES	COMMERCIAL MARINE IEEE 45,ABS;MIL-S-901C(DESIGN FOR GRADE B,TYPE A) AND MIL-STD-167 TYPE I(4-15HZ)& TYPE II
SPCL	SPECIAL TEST FEATURES	VIBRATION TESTING TO BE PERFORMED AT ASSEMBLY LEVEL PER MIL-STD-167 TYPE I(4-15HZ);MECHANICAL BALANCE PER MIL-STD-167 TYPE II
TTQY	TERMINAL TYPE AND QUANTITY	4 WIRE LEAD