S8122B10 Part by Ontic Engineering And Manufacturing Inc with NSN 5325-00-975-2659 - Request a Quote Now

Part Number: S8122B10

Manufacturer: ontic engineering and manufacturing inc

NSN: 5325-00-975-2659

CAGE Code: 45934

NIIN: 009752659

Item Name : grommet nonmetallic

INC Code: 33729

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

FSC: 5325 Fastening Devices

For competitive procurement options on part number S8122B10 from Ontic Engineering And Manufacturing Inc (CAGE Code 45934), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number S8122B10 Details:

Part number S8122B10 is manufactured by Ontic Engineering And Manufacturing Inc and listed with the item name Grommet Nonmetallic. Classified under NSN 5325-00-975-2659, the NIIN of this item is 009752659, its INC is 33729, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5325 Fastening Devices. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for S8122B10

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part S8122B10 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number S8122B10 with NSN 5325-00-975-2659, 5325009752659

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5325-00-975-2659 Item PartTypeName: GROMMET,NONMETALLIC	5325	009752659	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
S8122B10	2	2	3

Characteristics Data of NSN 5325-00-975-2659, 5325009752659

MRC	Criteria	Characteristic
AASF	NONMETALLIC HARDNESS RATING	55.0 MINIMUM SHORE DUROMETER A AND 65.0 MAXIMUM SHORE DUROMETER A
AAUB	HOLE DIAMETER	0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
ABGF	GROOVE WIDTH	0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM
ABKU	FLANGE THICKNESS	0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
ABKW	OVERALL HEIGHT	0.140 INCHES MINIMUM AND 0.170 INCHES MAXIMUM
AGME	GROMMET STYLE	ROUND
AGMF	LARGE FLANGE OUTSIDE DIAMETER	0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
AGMH	GROOVE OUTSIDE DIAMETER	0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM
AGMU	GROMMET CONSTRUCTION TYPE	SOLID
MATT	MATERIAL	RUBBER SYNTHETIC OVERALL