R8918S0096EMB Part by Parker Hannifin Corporation with NSN 4720-01-413-4024 - Request a Quote Now

Part Number: R8918S0096EMB

Manufacturer: parker hannifin corporation

NSN: 4720-01-413-4024

CAGE Code: 50599

NIIN: 014134024

Item Name : hose assembly nonmetallic

INC Code: 20311

Country: USA

NCB Code: 01

FSG: 47 Pipe Tubing Hose and Fittings

FSC: 4720 Hose and Tubing Flexible

For competitive procurement options on part number R8918S0096EMB from Parker Hannifin Corporation (CAGE Code 50599), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number R8918S0096EMB Details:

Part number R8918S0096EMB is manufactured by Parker Hannifin Corporation and listed with the item name Hose Assembly Nonmetallic. Classified under NSN 4720-01-413-4024, the NIIN of this item is 014134024, its INC is 20311, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 47 Pipe Tubing Hose and Fittings and Class (FSC) 4720 Hose and Tubing Flexible. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for R8918S0096EMB

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part R8918S0096EMB with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number R8918S0096EMB with NSN 4720-01-413-4024, 4720014134024

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
4720-01-413-4024 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC	4720	014134024	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
95850S0096EMB	2	2	3

Characteristics Data of NSN 4720-01-413-4024, 4720014134024

MRC	Criteria	Characteristic
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND"
AAJD	THREAD CLASS	3B 1ST END"
AAJD	THREAD CLASS	3B 2ND END"
AAJF	THREAD DIRECTION	RIGHT-HAND 1ST END"
AAJF	THREAD DIRECTION	RIGHT-HAND 2ND END"
AARX	INSIDE DIAMETER	0.485 INCHES NOMINAL"
ABJH	TEMP RATING	-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE"
ABKV	OUTSIDE DIAMETER	0.687 INCHES NOMINAL"
ACKH	MINIMUM INSIDE BENDING RADIUS	5.500 INCHES"
AGAV	END ITEM IDENTIFICATION	JOINT STARS PROGRAM"
AHNC	CONNECTION STYLE	SWIVEL NUT, FLARELESS 1ST END"
AHNC	CONNECTION STYLE	SWIVEL NUT, FLARELESS 2ND END"
AKUU	END CONNECTION DESIGN	ELBOW 2ND END"
AKUU	END CONNECTION DESIGN	STRAIGHT 1ST END"
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 1ST END"
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 2ND END"
CQBD	BURST TEST PRESSURE	5500.0 POUNDS PER SQUARE INCH"
CQCS	LAYER COMPOSITION AND LOCATION	OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE"
CQGM	MAXIMUM OPERATING PRESSURE	1500.0 POUNDS PER SQUARE INCH"
CQJX	NOMINAL THREAD SIZE	0.875 INCHES 1ST END"
CQJX	NOMINAL THREAD SIZE	0.875 INCHES 2ND END"
CQRB	SEAT ANGLE	12.0 DEGREES 1ST END"
CQRB	SEAT ANGLE	12.0 DEGREES 2ND END"
CRDW	HYDROSTATIC TEST PRESSURE	3000.0 POUNDS PER SQUARE INCH"
CRFY	FLOW ANGLE	45.0 DEGREES 2ND END"
CRWL	INSIDE SURFACE CONDITION	SMOOTH"
CRXX	MEASURING METHOD AND LENGTH	9.750 INCHES NOMINAL WORKING"
SUPP	SUPPLEMENTARY FEATURES	THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL;THE CURRENT APPROVED SOURCES,98441,50599 AND 78570 HAVE INSICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984,THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERI"
THSD	THREAD SERIES DESIGNATOR	UNJF 1ST END"
THSD	THREAD SERIES DESIGNATOR	UNJF 2ND END"
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND"
AAJD	THREAD CLASS	3B 1ST END"
AAJD	THREAD CLASS	3B 2ND END"
AAJF	THREAD DIRECTION	RIGHT-HAND 1ST END"
AAJF	THREAD DIRECTION	RIGHT-HAND 2ND END"
AARX	INSIDE DIAMETER	0.485 INCHES NOMINAL"
ABJH	TEMP RATING	-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE"
ABKV	OUTSIDE DIAMETER	0.687 INCHES NOMINAL"
ACKH	MINIMUM INSIDE BENDING RADIUS	5.500 INCHES"
AGAV	END ITEM IDENTIFICATION	JOINT STARS PROGRAM"
AHNC	CONNECTION STYLE	SWIVEL NUT, FLARELESS 1ST END"
AHNC	CONNECTION STYLE	SWIVEL NUT, FLARELESS 2ND END"
AKUU	END CONNECTION DESIGN	ELBOW 2ND END"
AKUU	END CONNECTION DESIGN	STRAIGHT 1ST END"
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 1ST END"
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 2ND END"
CQBD	BURST TEST PRESSURE	5500.0 POUNDS PER SQUARE INCH"
CQCS	LAYER COMPOSITION AND LOCATION	OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE"
CQGM	MAXIMUM OPERATING PRESSURE	1500.0 POUNDS PER SQUARE INCH"
CQJX	NOMINAL THREAD SIZE	0.875 INCHES 1ST END"
CQJX	NOMINAL THREAD SIZE	0.875 INCHES 2ND END"
CQRB	SEAT ANGLE	12.0 DEGREES 1ST END"
CQRB	SEAT ANGLE	12.0 DEGREES 2ND END"
CRDW	HYDROSTATIC TEST PRESSURE	3000.0 POUNDS PER SQUARE INCH"
CRFY	FLOW ANGLE	45.0 DEGREES 2ND END"
CRWL	INSIDE SURFACE CONDITION	SMOOTH"
CRXX	MEASURING METHOD AND LENGTH	9.750 INCHES NOMINAL WORKING"
SUPP	SUPPLEMENTARY FEATURES	THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL;THE CURRENT APPROVED SOURCES,98441,50599 AND 78570 HAVE INSICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984,THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERI"
THSD	THREAD SERIES DESIGNATOR	UNJF 1ST END"
THSD	THREAD SERIES DESIGNATOR	UNJF 2ND END"