RCP332X Part by Parker Hannifin Corporation with NSN 5340-01-601-5479 - Request a Quote Now

Part Number: RCP332X

Manufacturer: parker hannifin corporation

NSN: 5340-01-601-5479

CAGE Code: 30780

NIIN: 016015479

Item Name : clamp block

INC Code: 37415

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5340 Hardware Commercial

For competitive procurement options on part number RCP332X from Parker Hannifin Corporation (CAGE Code 30780), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number RCP332X Details:

Part number RCP332X is manufactured by Parker Hannifin Corporation and listed with the item name Clamp Block. Classified under NSN 5340-01-601-5479, the NIIN of this item is 016015479, its INC is 37415, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5340 Hardware Commercial. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for RCP332X

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part RCP332X with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 5340-01-601-5479, 5340016015479

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	85.0 MILLIMETERS NOMINAL
ABKW	OVERALL HEIGHT	60.0 MILLIMETERS NOMINAL
ABTB	MOUNTING HOLE DIAMETER	11.0 MILLIMETERS NOMINAL
ABTJ	MOUNTING HOLE QUANTITY	2
AFEC	DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH	15.0 MILLIMETERS NOMINAL
AXPC	CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES	60.0 MILLIMETERS NOMINAL
AZGM	MOUNTING FACILITY	UNTHREADED HOLE
BYGG	BLOCK HEIGHT	30.0 MILLIMETERS NOMINAL
CWTD	CLAMPING HOLE QUANTITY	1
CWWM	CLAMPING HOLE DIAMETER	32.0 MILLIMETERS NOMINAL SINGLE HOLE
CWXC	DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER	12.5 MILLIMETERS NOMINAL
CWXN	DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER	42.5 MILLIMETERS NOMINAL
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	CLAMP, MOUNTING 32MM DIAMETER
MATT	MATERIAL	PLASTIC