SX811 Part by Pawling Corporation with NSN 9390-00-618-4710 - Request a Quote Now

Part Number: SX811

Manufacturer: pawling corporation

NSN: 9390-00-618-4710

CAGE Code: 83473

NIIN: 006184710

Item Name : nonmetallic angle

Country: USA

NCB Code: 00

FSG: 93 Nonmetallic Fabricated Materials

FSC: 9390 Miscellaneous Fabricated Nonmetallic Materials

For competitive procurement options on part number SX811 from Pawling Corporation (CAGE Code 83473), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number SX811 Details:

Part number SX811 is manufactured by Pawling Corporation and listed with the item name Nonmetallic Angle. Classified under NSN 9390-00-618-4710, the NIIN of this item is 006184710, its INC is , and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 93 Nonmetallic Fabricated Materials and Class (FSC) 9390 Miscellaneous Fabricated Nonmetallic Materials. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SX811

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part SX811 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 9390-00-618-4710, 9390006184710

MRC	Criteria	Characteristic
ADZC	Environmental Protection	WEATHER RESISTANT
AASF	Nonmetallic Hardness Rating	35.0 MINIMUM SHORE DUROMETER A AND 45.0 MAXIMUM SHORE DUROMETER A
MATT	Material	RUBBER CHLOROPRENE CLASS CR
ABRY	Length	96.000 INCHES NOMINAL
AJGP	Base Flange Thickness	0.062 INCHES NOMINAL
ABKW	Overall Height	0.750 INCHES NOMINAL
AAGR	Cross-Sectional Shape Style	ANGLE
MDCL	Material Document And Classification	AMS 3240 ASSN STD SINGLE MATERIAL RESPONSE
ADXL	Left Side Flange Thickness	0.032 INCHES NOMINAL
ADXZ	Left Inside Angle In Deg	90
AASH	Minimum Tensile Strength	900 POUNDS PER SQUARE INCH
ABMK	Overall Width	0.500 INCHES NOMINAL
MRC	Decoded Requirement	Clear Text Reply
BHQU	Left-Side Flange Tip Style	LEFT SQUARE END
BHQV	Base Flange Tip Style	BASE SQUARE END