CLS-632-1 Part by Penn Engineering And Manufacturing with NSN 5310-01-067-3408 - Request a Quote Now

Part Number: CLS-632-1

Manufacturer: penn engineering and manufacturing

NSN: 5310-01-067-3408

CAGE Code: 46384

NIIN: 010673408

Item Name : nut plain clinch

INC Code: 01860

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5310 Nuts and Washers

For competitive procurement options on part number CLS-632-1 from Penn Engineering And Manufacturing (CAGE Code 46384), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number CLS-632-1 Details:

Part number CLS-632-1 is manufactured by Penn Engineering And Manufacturing and listed with the item name Nut Plain Clinch. Classified under NSN 5310-01-067-3408, the NIIN of this item is 010673408, its INC is 01860, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5310 Nuts and Washers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CLS-632-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part CLS-632-1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number CLS-632-1 with NSN 5310-01-067-3408, 5310010673408

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-01-067-3408 Item PartTypeName: NUT,PLAIN,CLINCH	5310	010673408	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
18004B-SS-0632	5	9	5

Characteristics Data of NSN 5310-01-067-3408, 5310010673408

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2B
AAJF	THREAD DIRECTION	RIGHT-HAND
AAVL	PILOT DIAMETER	0.182 INCHES MINIMUM AND 0.185 INCHES MAXIMUM
AAVM	PILOT LENGTH	0.033 INCHES MINIMUM AND 0.038 INCHES MAXIMUM
ACTA	NUT STYLE	CLINCH
ACTD	NUT DIAMETER	0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
ADEA	NUT HEIGHT	0.080 INCHES MINIMUM AND 0.115 INCHES MAXIMUM
BZRR	THREAD SERIES	UNC
CMLP	THREAD QUANTITY PER INCH	32
CQFM	HARDNESS RATING	70.0 ROCKWELL B MAXIMUM
CQJX	NOMINAL THREAD SIZE	0.138 INCHES
MATT	MATERIAL	STEEL COMP 303 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	66 FED STD SINGLE MATERIAL RESPONSE OVERALL
SFTT	SURFACE TREATMENT	PASSIVATE OVERALL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL