WSP5-1000 Part by Piedmont Instruments And Controls with NSN 6680-01-327-5062 - Request a Quote Now

Part Number: WSP5-1000

Manufacturer: piedmont instruments and controls

NSN: 6680-01-327-5062

CAGE Code: 0KTA4

NIIN: 013275062

Item Name : transmitter rate of

INC Code: 16585

Country: USA

NCB Code: 01

FSG: 66 Instruments and Laboratory Equipment

FSC: 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments

For competitive procurement options on part number WSP5-1000 from Piedmont Instruments And Controls (CAGE Code 0KTA4), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number WSP5-1000 Details:

Part number WSP5-1000 is manufactured by Piedmont Instruments And Controls and listed with the item name Transmitter Rate Of. Classified under NSN 6680-01-327-5062, the NIIN of this item is 013275062, its INC is 16585, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 66 Instruments and Laboratory Equipment and Class (FSC) 6680 Liquid And Gas Flow Liquid Level And Mechanical Motion Measuring Instruments. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for WSP5-1000

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part WSP5-1000 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 6680-01-327-5062, 6680013275062

MRC	Criteria	Characteristic
AGAV	III END ITEM IDENTIFICATION	C-130 AERIAL SPRAYMASS
BGNL	MEASUREMENT RANGE	6.6 TO 66.0 GALLONS PER MINUTE AND 4.7 TO 77.0 GALLONS PER MINUTE
ASSC	MECHANICAL CONNECTION SIZE	1 1/2 INCH
AFLW	ACTUATION METHOD	MOMENTUM TYPE USING IMPELLER AND TURBINE
ACZB	FREQUENCY RATING	1000.0 HERTZ NOMINAL
AMSE	VOLTAGE RATING	1.5 VOLTS NOMINAL
FEAT	SPECIAL FEATURES	ACCURACY POM 0.5% OF TRUE FLOW;RESPONSE TIME FOR STEP CHANGE IN FLOW RATE 2 TO 5 MILLISECONDS;MAXIMUM WORKINGPRESSURE 250 PSIG AT 250 DEG F RATED BY CLAMP TYPE;COIL INDUCTANCE 400 TO 605 MH;COIL RESISTANCE 1150 TO 1500 OHMS;MAX TEMPERATURE LIMITS -100 DEG TO 200 DEG F;MAX AIR OR STEAM PURGE VELOCITY 13 CFM;MATERIALS BODY 316 SST,INTERNAL FINISH 150 GRIT,ROTOR 17-4 PH SST/CD4MCU,BEARINGS 316 SST,BUSHINGS HIGH PERFORMANCE POLYMER
ABHP	OVERALL LENGTH	3.563 INCHES NOMINAL
ASSB	MECHANICAL CONNECTION QUANTITY	2
ASSD	MECHANICAL CONNECTION TYPE	FLANGE
AXGY	MOUNTING METHOD	FLANGE