DG400TC Part by Precision Multiple Controls Inc with NSN 5130-00-763-2138 - Request a Quote Now

Part Number: DG400TC

Manufacturer: precision multiple controls inc

NSN: 5130-00-763-2138

CAGE Code: 23138

NIIN: 007632138

Item Name : drill portable gasoline

Country: USA

NCB Code: 00

FSG: 51 Hand Tools

FSC: 5130 Hand Tools Power Driven

For competitive procurement options on part number DG400TC from Precision Multiple Controls Inc (CAGE Code 23138), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number DG400TC Details:

Part number DG400TC is manufactured by Precision Multiple Controls Inc and listed with the item name Drill Portable Gasoline. Classified under NSN 5130-00-763-2138, the NIIN of this item is 007632138, its INC is , and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 51 Hand Tools and Class (FSC) 5130 Hand Tools Power Driven. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for DG400TC

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part DG400TC with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 5130-00-763-2138, 5130007632138

MRC	Criteria	Characteristic
TEXT	General Characteristics Item Description	CAPABLE OF DRILLING HOLES UP TO 1/2 IN. IN STEEL,2-1/2 IN. IN WOOD,AND 4 IN. IN DIRT; POWERED BY AN AIR-COOLED,SINGLE CYLINDER,TWO-CYCLE GASOLINE ENGINE W/A RECOIL STARTER; 1 HP MINIMUM AT AN OPERATING SPEED OF 300 TO 400 RPM,MANUALLY OPERATED THROTTLE LOCATED IN PISTOL GRIP TYPE HANDLE TO VARY OPERATING SPEED,1/2 IN. CAPACITY MEDIUM DUTY OPERATED CHUCK,TANK 1 PINT MINIMUM CAPACITY,MAXIMUM WEIGHT 11-1/2 LBS,MAXIMUM LENGTH 15 IN.,FURNISHED WITH CASE,OPERATING AND MAINTENCE INSTRUCTIONS,LIST OF ACCESSORIES
MRC	Decoded Requirement	Clear Text Reply