G274020-1 Part by R T A Industries Inc with NSN 5340-01-228-0653 - Request a Quote Now

Part Number: G274020-1

Manufacturer: r t a industries inc

NSN: 5340-01-228-0653

CAGE Code: 66962

NIIN: 012280653

Item Name : bracket double angle

INC Code: 20354

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5340 Hardware Commercial

For competitive procurement options on part number G274020-1 from R T A Industries Inc (CAGE Code 66962), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number G274020-1 Details:

Part number G274020-1 is manufactured by R T A Industries Inc and listed with the item name Bracket Double Angle. Classified under NSN 5340-01-228-0653, the NIIN of this item is 012280653, its INC is 20354, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5340 Hardware Commercial. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for G274020-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part G274020-1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number G274020-1 with NSN 5340-01-228-0653, 5340012280653

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-228-0653 Item PartTypeName: BRACKET,DOUBLE ANGLE	5340	012280653	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
G274020-1	6	2	5

Characteristics Data of NSN 5340-01-228-0653, 5340012280653

MRC	Criteria	Characteristic
ACHY	MOUNTING HOLE TYPE	PLAIN
ADLK	FIRST LEG LENGTH	0.532 INCHES NOMINAL
ADLL	SECOND LEG LENGTH	0.532 INCHES NOMINAL
AHLF	SECOND LEG WIDTH	1.316 INCHES NOMINAL
AHLL	FIRST LEG SLOT LENGTH	0.250 INCHES NOMINAL
AHLM	FIRST LEG SLOT WIDTH	0.145 INCHES NOMINAL
AHLS	SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH	0.660 INCHES NOMINAL
AHLV	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.250 INCHES NOMINAL
AHLW	SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.650 INCHES NOMINAL
AHLZ	SECOND LEG SLOT LENGTH	0.310 INCHES NOMINAL
AHMA	SECOND LEG SLOT WIDTH	0.125 INCHES NOMINAL
AHPW	FIRST LEG THICKNESS	0.032 INCHES NOMINAL
AHPX	SECOND LEG THICKNESS	0.032 INCHES NOMINAL
AHPZ	CENTER SECTION HEIGHT	0.124 INCHES NOMINAL
AHQA	CENTER SECTION WIDTH	0.060 INCHES NOMINAL
AHQB	CENTER SECTION THICKNESS	0.032 INCHES NOMINAL
AHQN	FIRST LEG WIDTH	1.090 INCHES NOMINAL
AHQX	FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH	0.500 INCHES NOMINAL
AHRA	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.250 INCHES NOMINAL
AHRB	FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.190 INCHES NOMINAL
AJZU	FIRST LEG STYLE	SQUARE
AKAU	FIRST LEG HOLE ARRANGEMENT STYLE	2 SLOTS
AKBU	SECOND LEG STYLE	SQUARE
AKCU	SECOND LEG HOLE ARRANGEMENT STYLE	2 SLOTS
CSSP	SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
CSSQ	FIRST LEG ANGLE	90.0 DEGREES NOMINAL
CSSR	SECOND LEG ANGLE	90.0 DEGREES NOMINAL
MATT	MATERIAL	ALUMINUM ALLOY 5052
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE
SFTT	SURFACE TREATMENT	CHROMATE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE
STYL	STYLE DESIGNATOR	DOUBLE ANGLE