BACB10HS05RFSC9 Part by Rbc Aircraft Products Inc with NSN 3110-01-056-2975 - Request a Quote Now

Part Number: BACB10HS05RFSC9

Manufacturer: rbc aircraft products inc

NSN: 3110-01-056-2975

CAGE Code: 3NPS1

NIIN: 010562975

Item Name : cam follower needle bearing

INC Code: 00040

Country: USA

NCB Code: 01

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number BACB10HS05RFSC9 from Rbc Aircraft Products Inc (CAGE Code 3NPS1), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number BACB10HS05RFSC9 Details:

Part number BACB10HS05RFSC9 is manufactured by Rbc Aircraft Products Inc and listed with the item name Cam Follower Needle Bearing. Classified under NSN 3110-01-056-2975, the NIIN of this item is 010562975, its INC is 00040, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for BACB10HS05RFSC9

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part BACB10HS05RFSC9 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number BACB10HS05RFSC9 with NSN 3110-01-056-2975, 3110010562975

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-01-056-2975 Item PartTypeName: CAM FOLLOWER,NEEDLE BEARING	3110	010562975	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
BACB10BH59F9	5	9	5

Characteristics Data of NSN 3110-01-056-2975, 3110010562975

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.4060 INCHES MINIMUM AND 0.4680 INCHES MAXIMUM
ABHP	OVERALL LENGTH	1.4390 INCHES MINIMUM AND 1.5260 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	0.7490 INCHES MINIMUM AND 0.7510 INCHES MAXIMUM
AGRJ	STUD DIAMETER	0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
AGVT	OUTER RING WIDTH	0.3390 INCHES MINIMUM AND 0.3440 INCHES MAXIMUM
AGXF	STUD LENGTH	1.0940 INCHES MINIMUM AND 1.1560 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	24
CQJX	NOMINAL THREAD SIZE	0.312 INCHES
FEAT	SPECIAL FEATURES	NAS516 LUBRICATOR IN ROLLER END,COTTER PIN HOLE 0.076 IN. DIA LOCATED 0.109 IN. FROM END OF STUD
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	STEEL COMP E51100 OR STEEL COMP E52100 ROLLER
MATT	MATERIAL	STEEL COMP E52100 OR STEEL COMP 1070 OR STEEL COMP 1078 OR STEEL COMP 1080 OR STEEL COMP 1084 OR STEEL COMP 1090 OR STEEL COMP 1095 END PLATE
MATT	MATERIAL	STEEL COMP E52100 OR STEEL COMP 8620 OR STEEL COMP 8720 OR STEEL COMP 4620 OR STEEL COMP 8620H STUD
MATT	MATERIAL	STEEL COMP E52100 OUTER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR ASTM A322 ASSN STD ALL MATERIAL RESPONSES OR ASTM A304 ASSN STD ALL MATERIAL RESPONSES STUD
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OR ASTM A576 ASSN STD ALL MATERIAL RESPONSES END PLATE
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7420 MIL SPEC 1ST MATERIAL RESPONSE OUTER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7420 MIL SPEC ALL MATERIAL RESPONSES ROLLER
SFTT	SURFACE TREATMENT	CADMIUM END PLATE
SFTT	SURFACE TREATMENT	CADMIUM STUD
SFTT	SURFACE TREATMENT	CHROMIUM OUTER RING
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-C-320,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE END PLATE
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE STUD
STYL	STYLE DESIGNATOR	CAM FOLLOWER
THSD	THREAD SERIES DESIGNATOR	UNF