AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number YS112AB MODIFIED from Rexnord Industries Inc (CAGE Code 77896), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number YS112AB MODIFIED Details:
Part number YS112AB MODIFIED is manufactured by Rexnord Industries Inc and listed with the item name Bearing Roller Rod End. Classified under NSN 3110-01-022-2042, the NIIN of this item is 010222042, its INC is 00050, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-022-2042 Item PartTypeName: BEARING,ROLLER,ROD END | 3110 | 010222042 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 204-001-064 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.6100 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM |
| AAZF | SHANK STYLE | INTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 2.3600 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.9700 INCHES NOMINAL |
| AGGY | SHANK THREAD LENGTH | 1.0940 INCHES MINIMUM AND 1.1540 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.3450 INCHES MINIMUM AND 0.3600 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.8600 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYK | SHIELD QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 15.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | SLOT ACROSS FACE OF SHANK END 0.0950 IN. W 0.0720 IN. DEEP |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATT | MATERIAL | STEEL COMP 430 SHIELD |
| MATT | MATERIAL | STEEL COMP E3310 ROD END BODY |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7393 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SHIELD |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | SINGLE ROW,CONCAVE ROLLERS |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
