SF4-4A1-503 Part by Rexnord Industries Inc with NSN 3110-01-028-2506 - Request a Quote Now

Part Number: SF4-4A1-503

Manufacturer: rexnord industries inc

NSN: 3110-01-028-2506

CAGE Code: 77896

NIIN: 010282506

Item Name : bearing roller rod end

INC Code: 00050

Country: USA

NCB Code: 01

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number SF4-4A1-503 from Rexnord Industries Inc (CAGE Code 77896), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number SF4-4A1-503 Details:

Part number SF4-4A1-503 is manufactured by Rexnord Industries Inc and listed with the item name Bearing Roller Rod End. Classified under NSN 3110-01-028-2506, the NIIN of this item is 010282506, its INC is 00050, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SF4-4A1-503

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part SF4-4A1-503 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number SF4-4A1-503 with NSN 3110-01-028-2506, 3110010282506

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-01-028-2506 Item PartTypeName: BEARING,ROLLER,ROD END	3110	010282506	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
39381-31	6	9	5

Characteristics Data of NSN 3110-01-028-2506, 3110010282506

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3B
AAJF	THREAD DIRECTION	RIGHT-HAND
AAZE	SHANK DIAMETER	0.4370 INCHES NOMINAL
AAZF	SHANK STYLE	INTERNALLY THREADED
ABHP	OVERALL LENGTH	1.7000 INCHES MINIMUM AND 1.7950 INCHES MAXIMUM
ABXV	BORE DIAMETER	0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	0.7500 INCHES MINIMUM AND 0.8000 INCHES MAXIMUM
AGGY	SHANK THREAD LENGTH	0.7500 INCHES MINIMUM AND 0.8100 INCHES MAXIMUM
AGVT	OUTER RING WIDTH	0.3350 INCHES MINIMUM AND 0.3500 INCHES MAXIMUM
AGVU	INNER RING WIDTH	0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
AGXH	LENGTH FROM BORE CENTER TO SHANK END	1.3650 INCHES MINIMUM AND 1.3950 INCHES MAXIMUM
AGYJ	SEAL QUANTITY	2
AGYK	SHIELD QUANTITY	2
AGYW	BEARING SEAL TYPE	CONTACT
AGZA	ALIGNMENT TYPE	SELF-ALIGNING
AHAW	SELF-ALIGNMENT LOCATION	INTERNAL
ASDB	WIDTH ACROSS FLATS	0.4370 INCHES NOMINAL
CMLP	THREAD QUANTITY PER INCH	28
CQJX	NOMINAL THREAD SIZE	0.250 INCHES
CTLK	SELF-ALIGNMENT ANGLE	10.00 DEGREES NOMINAL
FEAT	SPECIAL FEATURES	0.0700 IN. DIA INSPECTION HOLE IN SHANK,0.0670 IN. MAX WIDE BY 0.0610 IN. MAX DEEP SLOT IN CENTER OF HEX,TWO 0.0460 IN. DIA LOCKWIRE HOLES IN HEX END,INTERNAL RADIAL PLAY 0.0002 IN. TO 0.0010 IN.
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	PLASTIC TETRAFLUOROETHYLENE SEAL
MATT	MATERIAL	STEEL COMP 4620 ROD END BODY
MATT	MATERIAL	STEEL COMP E52100 INNER RING
MATT	MATERIAL	STEEL COMP E52100 ROLLER
MATT	MATERIAL	STEEL SNAP RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7493 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SHIELD
SFTT	SURFACE TREATMENT	CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES
STYL	STYLE DESIGNATOR	SINGLE ROW,CONCAVE ROLLERS
THSD	THREAD SERIES DESIGNATOR	UNJF