AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number SM4-6D-41 from Rexnord Industries Inc (CAGE Code 77896), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number SM4-6D-41 Details:
Part number SM4-6D-41 is manufactured by Rexnord Industries Inc and listed with the item name Bearing Roller Rod End. Classified under NSN 3110-01-132-8647, the NIIN of this item is 011328647, its INC is 00050, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-132-8647 Item PartTypeName: BEARING,ROLLER,ROD END | 3110 | 011328647 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SM4-6D-41 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.3750 INCHES NOMINAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 2.1350 INCHES MINIMUM AND 2.1650 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.7500 INCHES MINIMUM AND 0.8000 INCHES MAXIMUM |
| AGGY | SHANK THREAD LENGTH | 1.1250 INCHES MINIMUM AND 1.1850 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.3350 INCHES MINIMUM AND 0.3500 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.7350 INCHES MINIMUM AND 1.7650 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYK | SHIELD QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | RADIAL CLEARENCE 0.0000 IN. MIN TO 0.0006 IN. MAX |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | GLASS FIBER AND PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MATT | MATERIAL | STEEL COMP 430 SHIELD |
| MATT | MATERIAL | STEEL COMP 4617 OR STEEL COMP 4620 ROD END BODY |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 ROLLER |
| MATT | MATERIAL | STEEL SNAP RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE SHIELD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7493 MIL SPEC ALL MATERIAL RESPONSES ROD END BODY |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | SINGLE ROW,CONCAVE ROLLERS |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
