ST4M200-6 Part by Safran Landing Systems with NSN 3110-01-049-4147 - Request a Quote Now

Part Number: ST4M200-6

Manufacturer: safran landing systems

NSN: 3110-01-049-4147

CAGE Code: 35962

NIIN: 010494147

Item Name : bearing roller needle

INC Code: 00051

Country: USA

NCB Code: 01

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number ST4M200-6 from Safran Landing Systems (CAGE Code 35962), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number ST4M200-6 Details:

Part number ST4M200-6 is manufactured by Safran Landing Systems and listed with the item name Bearing Roller Needle. Classified under NSN 3110-01-049-4147, the NIIN of this item is 010494147, its INC is 00051, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for ST4M200-6

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part ST4M200-6 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number ST4M200-6 with NSN 3110-01-049-4147, 3110010494147

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-01-049-4147 Item PartTypeName: BEARING,ROLLER,NEEDLE	3110	010494147	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
10107444	2	9	6

Characteristics Data of NSN 3110-01-049-4147, 3110010494147

MRC	Criteria	Characteristic
ABXV	BORE DIAMETER	0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM
ADGA	OVERALL OUTSIDE DIAMETER	0.9990 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
AGVT	OUTER RING WIDTH	0.9350 INCHES MINIMUM AND 0.9400 INCHES MAXIMUM
AGVU	INNER RING WIDTH	0.9900 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM
AGYE	SURFACE FINISH	GROUND
AGYJ	SEAL QUANTITY	2
AGYW	BEARING SEAL TYPE	CONTACT
AGZA	ALIGNMENT TYPE	RIGID
FEAT	SPECIAL FEATURES	80 PCT FULL OF SPECIFIED LUBRICANT,4 LUBE HOLES 90 DEGREES APART AND GROOVE IN INNER RINGS
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	PLASTIC ACETAL SEAL
MATT	MATERIAL	PLASTIC POLYAMIDE THRUST RETAINER
MATT	MATERIAL	STEEL COMP E52100 OR STEEL COMP 1074 WASHER
MATT	MATERIAL	STEEL COMP E52100 INNER RING
MATT	MATERIAL	STEEL COMP E52100 OUTER RING
MATT	MATERIAL	STEEL COMP E52100 ROLLER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS6440 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6441 ASSN STD SINGLE MATERIAL RESPONSE INNER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS6440 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6441 ASSN STD SINGLE MATERIAL RESPONSE OUTER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS6440 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6441 ASSN STD SINGLE MATERIAL RESPONSE ROLLER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MS6440 FED SPEC SINGLE MATERIAL RESPONSE OR AISI ASSN STD 2ND MATERIAL RESPONSE WASHER
SFTT	SURFACE TREATMENT	CADMIUM INNER RING
SFTT	SURFACE TREATMENT	CADMIUM WASHER
SFTT	SURFACE TREATMENT	CHROMIUM OUTER RING
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-C-320 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE INNER RING
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE WASHER