S313-13 Part by Simmonds Precision Products Inc with NSN 3110-01-095-7682 - Request a Quote Now

Part Number: S313-13

Manufacturer: simmonds precision products inc

NSN: 3110-01-095-7682

CAGE Code: 12511

NIIN: 010957682

Item Name : bearing ball annular

INC Code: 00014

Country: USA

NCB Code: 01

FSG: 31 Bearings

FSC: 3110 Bearings Antifriction Unmounted

For competitive procurement options on part number S313-13 from Simmonds Precision Products Inc (CAGE Code 12511), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number S313-13 Details:

Part number S313-13 is manufactured by Simmonds Precision Products Inc and listed with the item name Bearing Ball Annular. Classified under NSN 3110-01-095-7682, the NIIN of this item is 010957682, its INC is 00014, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3110 Bearings Antifriction Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for S313-13

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part S313-13 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number S313-13 with NSN 3110-01-095-7682, 3110010957682

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3110-01-095-7682 Item PartTypeName: BEARING,BALL,ANNULAR	3110	010957682	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
S313-13	2	2	7

Characteristics Data of NSN 3110-01-095-7682, 3110010957682

MRC	Criteria	Characteristic
ABMK	OVERALL WIDTH	0.1950 INCHES MINIMUM AND 0.1960 INCHES MAXIMUM
ABXV	BORE DIAMETER	0.2498 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM
AEPR	FLANGE OUTSIDE DIAMETER	0.6890 INCHES MINIMUM AND 0.6900 INCHES MAXIMUM
AGFF	FLANGE WIDTH	0.0020 INCHES MINIMUM AND 0.0420 INCHES MAXIMUM
AGVV	OUTER RING OUTSIDE DIAMETER	0.6248 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
AGYE	SURFACE FINISH	GROUND
AGYF	RETAINER FABRICATION METHOD	PRESSED
AGYK	SHIELD QUANTITY	2
AGZC	LOAD DIRECTION	RADIAL
AGZD	BORE SHAPE	STRAIGHT
AKVV	INTERNAL CLEARANCE	0.0001 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL
CTFZ	STANDARD TOLERANCE DESIGNATION	ABEC NO. 5P
FEAT	SPECIAL FEATURES	STABILIZED FOR OPERATION AT 500 DEG F,PACKED 25 PCT FULL W/LUBRICANT
LBMA	LUBRICATION MATERIAL	GREASE
LMDC	LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION	MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
MATT	MATERIAL	STEEL BALL
MATT	MATERIAL	STEEL INNER RING
MATT	MATERIAL	STEEL OUTER RING
MATT	MATERIAL	STEEL RETAINER
MATT	MATERIAL	STEEL SHIELD
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	S313-13,12511 MFR REF ALL MATERIAL RESPONSES BALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	S313-13,12511 MFR REF ALL MATERIAL RESPONSES INNER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	S313-13,12511 MFR REF ALL MATERIAL RESPONSES OUTER RING
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	S313-13,12511 MFR REF ALL MATERIAL RESPONSES RETAINER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	S313-13,12511 MFR REF ALL MATERIAL RESPONSES SHIELD
STYL	STYLE DESIGNATOR	NON-LOADING GROOVE,NON-SEPARABLE
TEST	TEST DATA DOCUMENT	12511-S313-13 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW