PP45F Part by Smith Meeker Engineering Co with NSN 5330-00-138-4629 - Request a Quote Now

Part Number: PP45F

Manufacturer: smith meeker engineering co

NSN: 5330-00-138-4629

CAGE Code: 55615

NIIN: 001384629

Item Name : packing with retainer

INC Code: 05680

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

FSC: 5330 Packing and Gasket Materials

For competitive procurement options on part number PP45F from Smith Meeker Engineering Co (CAGE Code 55615), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number PP45F Details:

Part number PP45F is manufactured by Smith Meeker Engineering Co and listed with the item name Packing With Retainer. Classified under NSN 5330-00-138-4629, the NIIN of this item is 001384629, its INC is 05680, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5330 Packing and Gasket Materials. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PP45F

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part PP45F with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number PP45F with NSN 5330-00-138-4629, 5330001384629

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5330-00-138-4629 Item PartTypeName: PACKING WITH RETAINER	5330	001384629	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
PP45F	6	9	5

Characteristics Data of NSN 5330-00-138-4629, 5330001384629

MRC	Criteria	Characteristic
ABHE	OUTSIDE DIAMETER	1.375 INCHES MINIMUM AND 1.380 INCHES MAXIMUM
ADTJ	RETAINER THICKNESS	0.092 INCHES MINIMUM AND 0.102 INCHES MAXIMUM
ADTK	PACKING RING CROSS-SECTIONAL DIAMETER	0.156 INCHES NOMINAL
AFFW	RETAINER INSIDE DIAMETER	1.118 INCHES MINIMUM AND 1.128 INCHES MAXIMUM
AFFX	PACKING INSIDE DIAMETER	1.060 INCHES MINIMUM AND 1.068 INCHES MAXIMUM
CQCF	CONSTRUCTION	ONE-PIECE
MATT	MATERIAL	RUBBER SYNTHETIC PACKING
MATT	MATERIAL	STEEL RETAINER
SFTT	SURFACE TREATMENT	CADMIUM RETAINER