4M45-9-36 Part by Smith Wayne Heating And Air with NSN 3120-01-385-7874 - Request a Quote Now

Part Number: 4M45-9-36

Manufacturer: smith wayne heating and air

NSN: 3120-01-385-7874

CAGE Code: 76310

NIIN: 013857874

Item Name : bushing sleeve

INC Code: 13206

Country: USA

NCB Code: 01

FSG: 31 Bearings

FSC: 3120 Bearings Plain Unmounted

For competitive procurement options on part number 4M45-9-36 from Smith Wayne Heating And Air (CAGE Code 76310), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 4M45-9-36 Details:

Part number 4M45-9-36 is manufactured by Smith Wayne Heating And Air and listed with the item name Bushing Sleeve. Classified under NSN 3120-01-385-7874, the NIIN of this item is 013857874, its INC is 13206, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3120 Bearings Plain Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 4M45-9-36

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 4M45-9-36 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 4M45-9-36 with NSN 3120-01-385-7874, 3120013857874

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-01-385-7874 Item PartTypeName: BUSHING,SLEEVE	3120	013857874	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
4M45-9-36	5	2	5

Characteristics Data of NSN 3120-01-385-7874, 3120013857874

MRC	Criteria	Characteristic
ADAS	BODY INSIDE DIAMETER	0.5560 INCHES MINIMUM AND 0.5575 INCHES MAXIMUM
MATT	MATERIAL	STEEL COMP 4130 OVERALL
CSYT	(NON-CORE DATA) CHAMFER ANGLE	45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
AAZP	(NON-CORE DATA) CHAMFER LENGTH	0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM 0.0250 INCHES MINIMUM AND 0.0350 INCHES MAXIMUM
CSFM	(NON-CORE DATA) UNDERCUT DEPTH	0.0050 INCHES MINIMUM AND 0.0100 INCHES MAXIMUM
AGFF	FLANGE WIDTH	0.0600 INCHES MINIMUM AND 0.0620 INCHES MAXIMUM
ABPC	(NON-CORE DATA) UNDERCUT WIDTH	0.0700 INCHES NOMINAL
BZLX	CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER SQUARE OUTSIDE RIGHT CORNER CHAMFERED INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER SQUARE LEFT FLANGE OUTSIDE RIGHT CORNER UNDERCUT LEFT FLANGE BODY CORNER
ABHP	OVERALL LENGTH	0.4220 INCHES NOMINAL
ADAR	BODY OUTSIDE DIAMETER	0.6892 INCHES MINIMUM AND 0.6902 INCHES MAXIMUM
STYL	STYLE DESIGNATOR	SOLID, EXTERNAL FLANGE ONE END
AEPR	FLANGE OUTSIDE DIAMETER	0.8020 INCHES MINIMUM AND 0.8220 INCHES MAXIMUM