TA360 Part by Snap-On Tools Corp with NSN 5210-01-388-2682 - Request a Quote Now

Part Number: TA360

Manufacturer: snap on tools corp

NSN: 5210-01-388-2682

CAGE Code: K5773

NIIN: 013882682

Item Name : gage torque angle

INC Code: 77777

Country: USA

NCB Code: 01

FSG: 52 Measuring Tools

FSC: 5210 measuring Tools Craftsmens

For competitive procurement options on part number TA360 from Snap-On Tools Corp (CAGE Code K5773), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number TA360 Details:

Part number TA360 is manufactured by Snap-On Tools Corp and listed with the item name Gage Torque Angle. Classified under NSN 5210-01-388-2682, the NIIN of this item is 013882682, its INC is 77777, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 52 Measuring Tools and Class (FSC) 5210 measuring Tools Craftsmens. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for TA360

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part TA360 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number TA360 with NSN 5210-01-388-2682, 5210013882682

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5210-01-388-2682 Item PartTypeName: GAGE,TORQUE ANGLE	5210	013882682	0	N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U		A	U	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
154189ST	5	9	5

Characteristics Data of NSN 5210-01-388-2682, 5210013882682

MRC	Criteria	Characteristic
TEXT	GENERAL CHARACTERISTICS ITEM DESCRIPTION	1/2 IN. FEMALE AND MALE SQUARE DRIVES; DIAL GRADUATED IN DEGREES IN EASY TO READ INCREMENTS; WITH ADJUSTABLE HOLDING ROD; USE TO INSTALL FASTENERS THAT REQUIRE A SPECIFIED ANGLE APPLICATION AFTER PRETORQUE LOAD HAS BEEN APPLIED