AS81935 2-03K Part by Society Of Automotive Engineers Inc with NSN 3120-01-407-5724 - Request a Quote Now

Part Number: AS81935 2-03K

Manufacturer: society of automotive engineers inc

NSN: 3120-01-407-5724

CAGE Code: 81343

NIIN: 014075724

Item Name : bearing plain rod end

INC Code: 13209

Country: USA

NCB Code: 01

FSG: 31 Bearings

FSC: 3120 Bearings Plain Unmounted

For competitive procurement options on part number AS81935 2-03K from Society Of Automotive Engineers Inc (CAGE Code 81343), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number AS81935 2-03K Details:

Part number AS81935 2-03K is manufactured by Society Of Automotive Engineers Inc and listed with the item name Bearing Plain Rod End. Classified under NSN 3120-01-407-5724, the NIIN of this item is 014075724, its INC is 13209, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3120 Bearings Plain Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for AS81935 2-03K

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part AS81935 2-03K with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number AS81935 2-03K with NSN 3120-01-407-5724, 3120014075724

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-01-407-5724 Item PartTypeName: BEARING,PLAIN,ROD END	3120	014075724	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
AS81935/2	1	9	D

Characteristics Data of NSN 3120-01-407-5724, 3120014075724

MRC	Criteria	Characteristic
CQFM	Hardness Rating	55.0 ROCKWELL C MINIMUM INNER MEMBER AND 62.0 ROCKWELL C MAXIMUM INNER MEMBER
CQFM	Hardness Rating	28.0 ROCKWELL C MINIMUM OUTER RING AND 37.0 ROCKWELL C MAXIMUM OUTER RING
CQFM	Hardness Rating	39.0 ROCKWELL C MINIMUM ROD END BODY AND 42.0 ROCKWELL C MAXIMUM ROD END BODY
ABXV	Bore Diameter	0.1895 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM
AGGH	Outer Member Width	0.3320 INCHES MINIMUM AND 0.3420 INCHES MAXIMUM
AGGY	Shank Thread Length	0.7500 INCHES NOMINAL
AGKP	Static Radial Load Rating	2360 POUNDS
AWDP	Thread Diameter	0.312 INCHES NOMINAL
AGGF	Outer Member Outside Diameter	0.7960 INCHES MINIMUM AND 0.8160 INCHES MAXIMUM
AGGG	Bore Center To Shank End Distance	1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM
AGHA	Inspection Hole Center To End Distance	0.3550 INCHES MINIMUM AND 0.3950 INCHES MAXIMUM
AGHB	Shank Width Across Wrench Flats	0.4270 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM
ABHP	Overall Length	1.7780 INCHES NOMINAL
MDCL	Material Document And Classification	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE RACE INSERT
MATT	Material	STEEL COMP 630 RACE INSERT
STDC	Surface Treatment Document And Classification	QQ-P-416 TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY
MRC	Decoded Requirement	Clear Text Reply
AAJD	Thread Class	3B
THSD	Thread Series Designator	UNJF
STYL	Style Designator	BALL TYPE
MDCL	Material Document And Classification	MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY
MATT	Material	STEEL COMP 440C INNER MEMBER
MATT	Material	STEEL COMP E4340 ROD END BODY
AAJF	Thread Direction	RIGHT-HAND
FEAT	Special Features	KEYWAY IN SHANK; SURFACE FINISH ON BALL PASSIVATE PER MIL-S-5002 OPTIONAL
AGGJ	Inner Member Width	0.4350 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
CMLP	Thread Quantity Per Inch	24
SFTT	Surface Treatment	CADMIUM ROD END BODY AND CHROMATE ROD END BODY
AAZF	Shank Style	INTERNALLY THREADED W/HEXAGON END AND INSPECTION HOLE
MATT	Material	PLASTIC POLYTETRAFLUOROETHYLENE RACE LINER
ZZZK	Specification/Standard Data	81349-MIL-B-81935 GOVERNMENT SPECIFICATION
MDCL	Material Document And Classification	AMS 5630 ASSN STD SINGLE MATERIAL RESPONSE INNER MEMBER