AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number J516 from Society Of Automotive Engineers Inc (CAGE Code 81343), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number J516 Details:
Part number J516 is manufactured by Society Of Automotive Engineers Inc and listed with the item name Hose Assembly Nonmetallic. Classified under NSN 4720-01-551-2478, the NIIN of this item is 015512478, its INC is 20311, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 47 Pipe Tubing Hose and Fittings and Class (FSC) 4720 Hose and Tubing Flexible. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-551-2478 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 015512478 | W | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| J516 | 5 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AARX | INSIDE DIAMETER | 0.375 INCHES NOMINAL" |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.781 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES" |
| AGAV | END ITEM IDENTIFICATION | ASSAULT AMPHIBIOUS VEHICLE AAVR7A1 AAV RAM/RS, 2350-01-458-7550" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL HOSE 1ST END" |
| CBBL | FEATURES PROVIDED | REUSABLE END FITTINGS" |
| CQBD | BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH" |
| CQGM | MAXIMUM OPERATING PRESSURE | 2500.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 36.000 INCHES NOMINAL WORKING" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY, RUBBER, HYDRAULIC AND PNEUMATIC, MEDIUM PRESSURE, FEMALE 37 DEGREE FLARED TUBE" |
| FEAT | SPECIAL FEATURES | HOSE IS TYPE 1, CLASS A, WITH HEAVY COVER; WIRE BRAID LAYER IS STEEL WIRE AND THE OD IS 0.594 INCHES DIA NOMINAL;HOSE IS OIL, OZONE, AND FUNGUS RESISTANT" |
| MARK | SPECIAL MARKINGS | HOSE IS TO BE EMBOSSED OR MARKED IN WHITE PERM INK ON THE LAY LINE WITH PIN, DT OF MFR (QTR AND QTR YR), CAPITAL LTRS OZ AND BULK HOSE MFR CAGE" |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE" |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END" |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349 - MIL-DTL-13531G 17 MAY 2006 AND MS50077E 17 MAY 2005 GOVERNMENT SPECIFICATION" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AARX | INSIDE DIAMETER | 0.375 INCHES NOMINAL" |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.781 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES" |
| AGAV | END ITEM IDENTIFICATION | ASSAULT AMPHIBIOUS VEHICLE AAVR7A1 AAV RAM/RS, 2350-01-458-7550" |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL HOSE 1ST END" |
| CBBL | FEATURES PROVIDED | REUSABLE END FITTINGS" |
| CQBD | BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH" |
| CQGM | MAXIMUM OPERATING PRESSURE | 2500.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 36.000 INCHES NOMINAL WORKING" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY, RUBBER, HYDRAULIC AND PNEUMATIC, MEDIUM PRESSURE, FEMALE 37 DEGREE FLARED TUBE" |
| FEAT | SPECIAL FEATURES | HOSE IS TYPE 1, CLASS A, WITH HEAVY COVER; WIRE BRAID LAYER IS STEEL WIRE AND THE OD IS 0.594 INCHES DIA NOMINAL;HOSE IS OIL, OZONE, AND FUNGUS RESISTANT" |
| MARK | SPECIAL MARKINGS | HOSE IS TO BE EMBOSSED OR MARKED IN WHITE PERM INK ON THE LAY LINE WITH PIN, DT OF MFR (QTR AND QTR YR), CAPITAL LTRS OZ AND BULK HOSE MFR CAGE" |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE" |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END" |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349 - MIL-DTL-13531G 17 MAY 2006 AND MS50077E 17 MAY 2005 GOVERNMENT SPECIFICATION" |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
