AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
For competitive procurement options on part number SFJ06A-129 from Specline Inc (CAGE Code 16746), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.
Part Number SFJ06A-129 Details:
Part number SFJ06A-129 is manufactured by Specline Inc and listed with the item name Bearing Sleeve. Classified under NSN 3120-01-297-1795, the NIIN of this item is 012971795, its INC is 13205, and its NCB code is 01 (USA).
For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3120 Bearings Plain Unmounted. These details are important for confirming parts before making a purchase.
Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.
How to Get Started on Procurement
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3120-01-297-1795 Item PartTypeName: BEARING,SLEEVE | 3120 | 012971795 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SFJ06A-129 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SPECLON SPS 001,CAGEC 16746 MFR REF SINGLE MATERIAL RESPONSE INSIDE DIAMETER SURFACE OF BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SPECLON SPS 001,CAGEC 16746 MFR REF SINGLE MATERIAL RESPONSE LEFT END SURFACE OF BODY AND FLANGE |
| ABHP | OVERALL LENGTH | 0.1550 INCHES NOMINAL |
| ADAR | BODY OUTSIDE DIAMETER | 0.5007 INCHES MINIMUM AND 0.5017 INCHES MAXIMUM |
| ADAS | BODY INSIDE DIAMETER | 0.3755 INCHES MINIMUM AND 0.3765 INCHES MAXIMUM |
| MATT | MATERIAL | ALUMINUM ALLOY 7075 OUTSIDE DIAMETER SURFACE OF FLANGE |
| MATT | MATERIAL | ALUMINUM ALLOY 7075 RIGHT END SURFACE OF LEFT FLANGE |
| MATT | MATERIAL | PLASTIC ACETAL LEFT END SURFACE OF BODY AND FLANGE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF BODY |
| SFTT | SURFACE TREATMENT | ANODIZE OR CHROMATE OUTSIDE DIAMETER SURFACE OF BODY |
| SFTT | SURFACE TREATMENT | ANODIZE OR CHROMATE OUTSIDE DIAMETER SURFACE OF FLANGE |
| SFTT | SURFACE TREATMENT | ANODIZE OR CHROMATE RIGHT END SURFACE OF BODY |
| SFTT | SURFACE TREATMENT | ANODIZE OR CHROMATE RIGHT END SURFACE OF LEFT FLANGE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF BODY |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE RIGHT END SURFACE OF BODY |
| AEPR | FLANGE OUTSIDE DIAMETER | 0.8650 INCHES NOMINAL |
| AGFF | FLANGE WIDTH | 0.0575 INCHES MINIMUM AND 0.0625 INCHES MAXIMUM |
| BZLX | CORNER SHAPE | SQUARE ALL CORNERS |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY |
| MATT | MATERIAL | ALUMINUM ALLOY 7075 OUTSIDE DIAMETER SURFACE OF BODY |
| MATT | MATERIAL | ALUMINUM ALLOY 7075 RIGHT END SURFACE OF BODY |
| MATT | MATERIAL | PLASTIC ACETAL INSIDE DIAMETER SURFACE OF BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE OUTSIDE DIAMETER SURFACE OF BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A200/11 FED SPEC SINGLE MATERIAL RESPONSE RIGHT END SURFACE OF LEFT FLANGE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OUTSIDE DIAMETER SURFACE OF FLANGE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE RIGHT END SURFACE OF LEFT FLANGE |
| STYL | STYLE DESIGNATOR | SOLID,EXTERNAL FLANGE ONE END |
|
Guaranteed on-time delivery. |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Complete purchasing solutions |
Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.
Request for Quote
