AP7087-1-04V Part by Sps Technologies Inc with NSN 4730-01-419-4757 - Request a Quote Now

Part Number: AP7087-1-04V

Manufacturer: sps technologies inc

NSN: 4730-01-419-4757

CAGE Code: 01673

NIIN: 014194757

Item Name : sleeve flared tube fitting

INC Code: 18027

Country: USA

NCB Code: 01

FSG: 47 Pipe Tubing Hose and Fittings

FSC: 4730 Hose Pipe Tube Lubrication and Railing Fittings

For competitive procurement options on part number AP7087-1-04V from Sps Technologies Inc (CAGE Code 01673), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number AP7087-1-04V Details:

Part number AP7087-1-04V is manufactured by Sps Technologies Inc and listed with the item name Sleeve Flared Tube Fitting. Classified under NSN 4730-01-419-4757, the NIIN of this item is 014194757, its INC is 18027, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 47 Pipe Tubing Hose and Fittings and Class (FSC) 4730 Hose Pipe Tube Lubrication and Railing Fittings. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for AP7087-1-04V

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part AP7087-1-04V with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number AP7087-1-04V with NSN 4730-01-419-4757, 4730014194757

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
4730-01-419-4757 Item PartTypeName: SLEEVE,FLARED,TUBE FITTING	4730	014194757	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
34023JJ04	5	9	5

Characteristics Data of NSN 4730-01-419-4757, 4730014194757

MRC	Criteria	Characteristic
AASG	CASEHARDENING INDICATOR	NOT CASEHARDENED
ABHP	OVERALL LENGTH	0.635 INCHES NOMINAL
AGAV	III END ITEM IDENTIFICATION	AIRCRAFT, C-17A
AGFF	FLANGE WIDTH	0.200 INCHES NOMINAL
AHTC	FLANGE OUTSIDE DIAMETER	0.383 INCHES NOMINAL
AJFY	SEAT ANGLE IN DEG	41.0
ARYW	SLEEVE OUTSIDE DIAMETER	0.326 INCHES NOMINAL
CPMS	HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED	0.250 INCHES NOMINAL
FEAT	SPECIAL FEATURES	MATERIAL SPEC. PH13-8MO; PASIVATED AND ION VAPOR DEPOSITION PER MIL-C-83488, TY I, CL 3
MATT	MATERIAL	ALUMINUM ALLOY
SFTT	SURFACE TREATMENT	PASSIVATE
STYL	STYLE DESIGNATOR	SLEEVE