SFT930-4-19 Part by Sps Technologies Inc with NSN 5305-00-969-4377 - Request a Quote Now

Part Number: SFT930-4-19

Manufacturer: sps technologies inc

NSN: 5305-00-969-4377

CAGE Code: 56878

NIIN: 009694377

Item Name : screw machine

INC Code: 06657

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

FSC: 5305 Screws

For competitive procurement options on part number SFT930-4-19 from Sps Technologies Inc (CAGE Code 56878), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number SFT930-4-19 Details:

Part number SFT930-4-19 is manufactured by Sps Technologies Inc and listed with the item name Screw Machine. Classified under NSN 5305-00-969-4377, the NIIN of this item is 009694377, its INC is 06657, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5305 Screws. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for SFT930-4-19

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part SFT930-4-19 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 5305-00-969-4377, 5305009694377

MRC	Criteria	Characteristic
CRSQ	Countersink Angle	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
CQFM	Hardness Rating	55.0 ROCKWELL C MINIMUM AND 58.0 ROCKWELL C MAXIMUM
AASK	Head Style	FLAT COUNTERSUNK
ABQZ	Internal Drive Style	TORQUE SET
AHYM	Nominal Thread Diameter	0.250 INCHES
AASA	Thread Length	0.293 INCHES MINIMUM
CYBA	Screw Surface Treatment	NICKEL AND CADMIUM AND CHROMATE
MRC	Decoded Requirement	Clear Text Reply
CQBC	Minimum Tensile Strength	300000 POUNDS PER SQUARE INCH
AASL	Head Diameter	0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
THSD	Thread Series Designator	UNJF
AASB	Fastener Length	1.480 INCHES NOMINAL
CMLP	Thread Quantity Per Inch	28
AAJF	Thread Direction	RIGHT-HAND
AAJD	Thread Class	3A
CYAU	Screw Material	STEEL