PBF1570-4-13 Part by Sps Technologies Inc with NSN 5305-01-392-2600 - Request a Quote Now

Part Number: PBF1570-4-13

Manufacturer: sps technologies inc

NSN: 5305-01-392-2600

CAGE Code: 27624

NIIN: 013922600

Item Name : screw close toleran

INC Code: 29294

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5305 Screws

For competitive procurement options on part number PBF1570-4-13 from Sps Technologies Inc (CAGE Code 27624), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number PBF1570-4-13 Details:

Part number PBF1570-4-13 is manufactured by Sps Technologies Inc and listed with the item name Screw Close Toleran. Classified under NSN 5305-01-392-2600, the NIIN of this item is 013922600, its INC is 29294, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5305 Screws. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PBF1570-4-13

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part PBF1570-4-13 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number PBF1570-4-13 with NSN 5305-01-392-2600, 5305013922600

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5305-01-392-2600 Item PartTypeName: SCREW,CLOSE TOLERANCE	5305	013922600	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
03A415-4-13	5	9	5

Characteristics Data of NSN 5305-01-392-2600, 5305013922600

MRC	Criteria	Characteristic
AASK	Head Style	FLAT COUNTERSUNK
MRC	Decoded Requirement	Clear Text Reply
CQBC	Minimum Tensile Strength	240000 POUNDS PER SQUARE INCH
AAWU	Single Shear Strength	132000 POUNDS PER SQUARE INCH
CMLP	Thread Quantity Per Inch	28
SFTT	Surface Treatment	PASSIVATE OVERALL
THSD	Thread Series Designator	UNJF
CRSQ	Countersink Angle	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
AAJF	Thread Direction	RIGHT-HAND
MDCL	Material Document And Classification	AMS 5844 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
AASL	Head Diameter	0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
AASB	Fastener Length	1.296 INCHES MINIMUM AND 1.326 INCHES MAXIMUM
AASA	Thread Length	0.498 INCHES NOMINAL
ANEE	Grip Length	0.813 INCHES NOMINAL
ABQZ	Internal Drive Style	OFFSET CRUCIFORM (TORQUE SET)
AHYM	Nominal Thread Diameter	0.250 INCHES
AAUR	Grip Diameter	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
MATT	Material	COBALT COMP MP-35-N OVERALL
AAJD	Thread Class	3A
STDC	Surface Treatment Document And Classification	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL