AIC984-5-13R Part by Sps Technologies Inc with NSN 5305-01-462-7141 - Request a Quote Now

Part Number: AIC984-5-13R

Manufacturer: sps technologies inc

NSN: 5305-01-462-7141

CAGE Code: 06725

NIIN: 014627141

Item Name : screw close toleran

INC Code: 29294

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5305 Screws

For competitive procurement options on part number AIC984-5-13R from Sps Technologies Inc (CAGE Code 06725), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number AIC984-5-13R Details:

Part number AIC984-5-13R is manufactured by Sps Technologies Inc and listed with the item name Screw Close Toleran. Classified under NSN 5305-01-462-7141, the NIIN of this item is 014627141, its INC is 29294, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5305 Screws. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for AIC984-5-13R

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part AIC984-5-13R with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 5305-01-462-7141, 5305014627141

MRC	Criteria	Characteristic
AASK	Head Style	FLAT COUNTERSUNK
AHYM	Nominal Thread Diameter	0.468 INCHES
MRC	Decoded Requirement	Clear Text Reply
ANEE	Grip Length	0.625 INCHES NOMINAL
AASB	Fastener Length	0.063 INCHES NOMINAL
CQFM	Hardness Rating	46.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL
SFTT	Surface Treatment	CADMIUM OVERALL
CRSQ	Countersink Angle	100.0 DEGREES NOMINAL
CQBC	Minimum Tensile Strength	220000 POUNDS PER SQUARE INCH
MATT	Material	STEEL OVERALL
AAJF	Thread Direction	RIGHT-HAND
ABQZ	Internal Drive Style	OFFSET CRUCIFORM (TORQUE SET)
AASA	Thread Length	0.438 INCHES NOMINAL
AASL	Head Diameter	0.604 INCHES NOMINAL
THSD	Thread Series Designator	UNJF
CMLP	Thread Quantity Per Inch	24
AAUR	Grip Diameter	0.311 INCHES NOMINAL
AAJD	Thread Class	3A