A1C1025-4-12 Part by Sps Technologies Inc with NSN 5306-00-959-0985 - Request a Quote Now

Part Number: A1C1025-4-12

Manufacturer: sps technologies inc

NSN: 5306-00-959-0985

CAGE Code: 06725

NIIN: 009590985

Item Name : bolt internal wrenching

INC Code: 06666

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

FSC: 5306 Bolts

For competitive procurement options on part number A1C1025-4-12 from Sps Technologies Inc (CAGE Code 06725), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number A1C1025-4-12 Details:

Part number A1C1025-4-12 is manufactured by Sps Technologies Inc and listed with the item name Bolt Internal Wrenching. Classified under NSN 5306-00-959-0985, the NIIN of this item is 009590985, its INC is 06666, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5306 Bolts. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for A1C1025-4-12

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part A1C1025-4-12 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 5306-00-959-0985, 5306009590985

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3A
AAJF	THREAD DIRECTION	RIGHT-HAND
AASA	THREAD LENGTH	0.438 INCHES MINIMUM AND 0.458 INCHES MAXIMUM
AASB	FASTENER LENGTH	1.188 INCHES NOMINAL
AASK	HEAD STYLE	FLAT CHAMFER
AASL	HEAD DIAMETER	0.369 INCHES MINIMUM AND 0.374 INCHES MAXIMUM
AASU	HEAD HEIGHT	0.253 INCHES MINIMUM AND 0.273 INCHES MAXIMUM
AAWB	SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE
ABQZ	INTERNAL DRIVE STYLE	HEXAGON
AHYM	NOMINAL THREAD DIAMETER	0.250 INCHES
ASDB	WIDTH ACROSS FLATS	0.187 INCHES MINIMUM AND 0.189 INCHES MAXIMUM
CMLP	THREAD QUANTITY PER INCH	28
CQBC	MINIMUM TENSILE STRENGTH	170000 POUNDS PER SQUARE INCH
CRZS	DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.078 INCHES NOMINAL FIRST HOLE
MATT	MATERIAL	STEEL CORROSION RESISTING OVERALL
THSD	THREAD SERIES DESIGNATOR	UNF