NS103146G02-1 Part by Sps Technologies Inc with NSN 5310-01-053-6511 - Request a Quote Now

Part Number: NS103146G02-1

Manufacturer: sps technologies inc

NSN: 5310-01-053-6511

CAGE Code: 80539

NIIN: 010536511

Item Name : nut plain plate

INC Code: 01872

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5310 Nuts and Washers

For competitive procurement options on part number NS103146G02-1 from Sps Technologies Inc (CAGE Code 80539), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number NS103146G02-1 Details:

Part number NS103146G02-1 is manufactured by Sps Technologies Inc and listed with the item name Nut Plain Plate. Classified under NSN 5310-01-053-6511, the NIIN of this item is 010536511, its INC is 01872, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5310 Nuts and Washers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for NS103146G02-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part NS103146G02-1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number NS103146G02-1 with NSN 5310-01-053-6511, 5310010536511

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-01-053-6511 Item PartTypeName: NUT,PLAIN,PLATE	5310	010536511	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
A12165-1-3	6	9	5

Characteristics Data of NSN 5310-01-053-6511, 5310010536511

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3B
AAJF	THREAD DIRECTION	RIGHT-HAND
ABKW	OVERALL HEIGHT	0.658 INCHES MAXIMUM
ABTB	MOUNTING HOLE DIAMETER	0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM
ACTA	NUT STYLE	PLATE
ACVN	NUT LENGTH	0.805 INCHES MAXIMUM
ADEA	NUT HEIGHT	0.255 INCHES MAXIMUM
ADEB	PLATE THICKNESS	0.020 INCHES NOMINAL
ADEC	PLATE WIDTH	0.418 INCHES MINIMUM AND 0.443 INCHES MAXIMUM
ADFP	NUT MOUNTING PROVISION	STRAIGHT HOLES
ADFU	MOUNTING HOLE ARRANGEMENT STYLE	2 HOLES
ADFW	DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER	0.290 INCHES MINIMUM AND 0.300 INCHES MAXIMUM
ADFY	CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH	0.588 INCHES MINIMUM AND 0.592 INCHES MAXIMUM
BZRR	THREAD SERIES	UNJF
CBBL	FEATURES PROVIDED	FLOATING NUT
CMLP	THREAD QUANTITY PER INCH	32
CQJX	NOMINAL THREAD SIZE	0.190 INCHES
MATT	MATERIAL	RUBBER SYNTHETIC SEAL
MATT	MATERIAL	STEEL NUT
MATT	MATERIAL	STEEL SHELL
MATT	MATERIAL	STEEL WASHER
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS3304 ASSN STD 1ST MATERIAL RESPONSE OR MIL-R-25988 MIL SPEC 2ND MATERIAL RESPONSE SEAL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-R-25988 MIL SPEC SINGLE MATERIAL RESPONSE NUT
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-R-25988 MIL SPEC SINGLE MATERIAL RESPONSE SHELL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	MIL-R-25988 MIL SPEC SINGLE MATERIAL RESPONSE WASHER
SFTT	SURFACE TREATMENT	CADMIUM NUT
SFTT	SURFACE TREATMENT	CADMIUM SHELL
SFTT	SURFACE TREATMENT	CADMIUM WASHER
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE NUT
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE SHELL
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE WASHER