NE8235-10 Part by Sps Technologies Inc with NSN 5310-01-522-7877 - Request a Quote Now

Part Number: NE8235-10

Manufacturer: sps technologies inc

NSN: 5310-01-522-7877

CAGE Code: 56878

NIIN: 015227877

Item Name : nut self locking as

INC Code: 29736

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5310 Nuts and Washers

For competitive procurement options on part number NE8235-10 from Sps Technologies Inc (CAGE Code 56878), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number NE8235-10 Details:

Part number NE8235-10 is manufactured by Sps Technologies Inc and listed with the item name Nut Self Locking As. Classified under NSN 5310-01-522-7877, the NIIN of this item is 015227877, its INC is 29736, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5310 Nuts and Washers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for NE8235-10

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part NE8235-10 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number NE8235-10 with NSN 5310-01-522-7877, 5310015227877

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-01-522-7877 Item PartTypeName: NUT,SELF-LOCKING,ASSEMBLED WASHE	5310	015227877		N	A
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
			A	A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
NE8235-10	6	2	3

Characteristics Data of NSN 5310-01-522-7877, 5310015227877

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	3B
AAJF	THREAD DIRECTION	RIGHT-HAND
AAUM	LOCKING FEATURE	PREVAILING TORQUE WITH NONMETALLIC INSERT
AAVX	WASHER OUTSIDE DIAMETER	1.209 INCHES NOMINAL
AAWY	COUNTERBORE DIAMETER	0.760 INCHES MINIMUM FIRST END AND 0.770 INCHES MAXIMUM FIRST END
ABKW	OVERALL HEIGHT	0.802 INCHES MINIMUM AND 0.822 INCHES MAXIMUM
ACTA	NUT STYLE	FLAT WITH TURNED BACK EDGE
ADEA	NUT HEIGHT	0.170 INCHES NOMINAL
ADFK	NUT COUNTERBORE DEPTH	0.387 INCHES MINIMUM FIRST END AND 0.407 INCHES MAXIMUM FIRST END
AGAV	END ITEM IDENTIFICATION	C-130J-30 AIRCRAFT FLIGHT CONTROLS
ASDB	WIDTH ACROSS FLATS	0.990 INCHES MINIMUM AND 1.002 INCHES MAXIMUM
AZKQ	TEMP RATING	250.0 DEG FAHRENHEIT MAXIMUM
BZRR	THREAD SERIES	UNJF
CMLP	THREAD QUANTITY PER INCH	18
CQJX	NOMINAL THREAD SIZE	0.625 INCHES
CXCY	PART NAME ASSIGNED BY CONTROLLING AGENCY	NUT, HEXAGON, CASTELLATED CAPTIVE WASHER, NYLON INSER, 250 DEG F
FEAT	SPECIAL FEATURES	8OPPOSITE SLOTS MUST COINCIDE WITHIN 0.005 AND SLOT AXIS MUST BE WITHIN 0.005 OF THREAD PD AXIS; WRENCH TORQUE 750 MIN IN LB; INSTALLATION ASSEMBLY 600 IN LB; LOCKING TORQUE 150 MAX IN LB; TENSILE STRENGTH 10,000 LBS MIN; WEIGHT APPROX 10.2
MATT	MATERIAL	ALUMINUM ALLOY 2024 WASHER AND ALUMINUM ALLOY 7075 WASHER
MATT	MATERIAL	PLASTIC POLYAMIDE LOCKING INSERT
MATT	MATERIAL	STEEL NUT
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5024 ASSN STD 1ST MATERIAL RESPONSE NUT OR AMS 5020 ASSN STD 2ND MATERIAL RESPONSE NUT OR AMS 6322 ASSN STD 3RD MATERIAL RESPONSE NUT OR AMS 6323 ASSN STD 4TH MATERIAL RESPONSE NUT OR AMS 6325 ASSN STD 5TH MATERIAL RESPONSE NUT OR AMS 6
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225 FED SPEC 1ST MATERIAL RESPONSE WASHER OR QQ-A-250 FED SPEC 2ND MATERIAL RESPONSE WASHER
SFTT	SURFACE TREATMENT	CADMIUM NUT
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE WASHER
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT
SUPP	SUPPLEMENTARY FEATURES	LOCKHEED TECHNICAL MANUAL AAP7211.031-4-27