HLT731TB-8-7 Part by Sps Technologies Inc with NSN 5320-01-564-0504 - Request a Quote Now

Part Number: HLT731TB-8-7

Manufacturer: sps technologies inc

NSN: 5320-01-564-0504

CAGE Code: 56878

NIIN: 015640504

Item Name : pin rivet

INC Code: 67165

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5320 Rivets

For competitive procurement options on part number HLT731TB-8-7 from Sps Technologies Inc (CAGE Code 56878), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number HLT731TB-8-7 Details:

Part number HLT731TB-8-7 is manufactured by Sps Technologies Inc and listed with the item name Pin Rivet. Classified under NSN 5320-01-564-0504, the NIIN of this item is 015640504, its INC is 67165, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5320 Rivets. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for HLT731TB-8-7

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part HLT731TB-8-7 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number HLT731TB-8-7 with NSN 5320-01-564-0504, 5320015640504

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5320-01-564-0504 Item PartTypeName: PIN-RIVET	5320	015640504	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
HLT731DL-8-7	5	2	5

Characteristics Data of NSN 5320-01-564-0504, 5320015640504

MRC	Criteria	Characteristic
MATT	Material	STEEL CORROSION RESISTING OVERALL
AAZG	Head Major Diameter	0.389 INCHES MINIMUM AND 0.394 INCHES MAXIMUM
AATB	Width Between Flats	0.094 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
AAJD	Thread Class	3A
MRC	Decoded Requirement	Clear Text Reply
CRSQ	Countersink Angle	100.0 DEGREES NOMINAL
AASK	Head Style	FLUSH COUNTERSUNK
AASB	Fastener Length	0.863 INCHES MINIMUM AND 0.886 INCHES MAXIMUM
THSD	Thread Series Designator	UNJF
CMLP	Thread Quantity Per Inch	28
CQJX	Nominal Thread Size	0.250 INCHES
AAZF	Shank Style	PIN-RIVET, STRAIGHT, THREADED
ANEE	Grip Length	0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM
AAZE	Shank Diameter	0.264 INCHES MINIMUM AND 0.265 INCHES MAXIMUM