IS-50F-150 18IN Part by Tate Andale Inc with NSN 4730-01-433-1303 - Request a Quote Now

Part Number:  IS-50F-150 18IN
Manufacturer:  tate andale inc
CAGE Code:  09032
NIIN:  014331303
Item Name :  strainer sediment
INC Code:  04200
Country:  USA
NCB Code:  01

For competitive procurement options on part number IS-50F-150 18IN from Tate Andale Inc (CAGE Code 09032), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number IS-50F-150 18IN Details:

Part number IS-50F-150 18IN is manufactured by Tate Andale Inc and listed with the item name Strainer Sediment. Classified under NSN 4730-01-433-1303, the NIIN of this item is 014331303, its INC is 04200, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 47 Pipe Tubing Hose and Fittings and Class (FSC) 4730 Hose Pipe Tube Lubrication and Railing Fittings. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for IS-50F-150 18IN

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

How to Get Started on Procurement

  1. Complete an RFQ Form: Fill out this form for part IS-50F-150 18IN with details on your operational requirements, including your target quantity and expected turnaround time.
  2. Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
  3. Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number IS-50F-150 18IN with NSN 4730-01-433-1303, 4730014331303

NSNFSCNIINCLSHazmatDEMILCancelled NSN
4730-01-433-1303

Item PartTypeName:

STRAINER,SEDIMENT

47300143313030N
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
33460/603236-3,-4525

Characteristics Data of NSN 4730-01-433-1303, 4730014331303

MRCCriteriaCharacteristic
AAXXMOUNTING TYPEBRACKET W/THREADED HOLE BOTTOM SIDE
ABTBMOUNTING HOLE DIAMETER0.625 INCHES NOMINAL
ABTJMOUNTING HOLE QUANTITY2
ADAQBODY LENGTH31.500 INCHES NOMINAL
ADATBODY WIDTH41.000 INCHES NOMINAL
ADAUBODY HEIGHT43.625 INCHES NOMINAL
AFQMDISTANCE BETWEEN MOUNTING HOLE CENTERS3.750 INCHES NOMINAL
AGAVEND ITEM IDENTIFICATIONBOB HOPE CLASS T-AKR 300
AKBNMOUNTING FACILITY THREAD DIRECTIONRIGHT-HAND
AKSVPERFORATION DIAMETER0.250 INCHES NOMINAL
AKSWPERFORATION QUANTITY8.0 PER SQUARE INCH
AZKQTEMP RATING95.0 DEG FAHRENHEIT MINIMUM AND 150.0 DEG FAHRENHEIT MAXIMUM
CBQDBRACKET QUANTITY2
CQGMMAXIMUM OPERATING PRESSURE150.0 POUNDS PER SQUARE INCH
CRXWFILTERING MEDIA DESIGNPERFORATED SINGLE FILTERING MEDIA RESPONSE
CRXZFIRST INTAKE CONNECTION TYPEPLAIN FACE FLANGE CENTER
CSJCMOUNTING FACILITY NOMINAL THREAD SIZE1.000 INCHES
CSJRFIRST DISCHARGE CONNECTION RELATIONSHIP TO INTAKE CONNECTIONIDENTICAL TO FIRST INTAKE CONNECTION
CSKYDISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET26.750 INCHES NOMINAL
CSRHFIRST INTAKE FLANGE OUTSIDE DIAMETER25.000 INCHES NOMINAL
CSTDFIRST INTAKE FLANGE SHAPE STYLEROUND W/UNTHREADED BOLT HOLES
CTBJFIRST INTAKE FLANGE FACE STYLEPLAIN
CTHJFIRST INTAKE FLANGE THICKNESS1.562 INCHES NOMINAL
MATTMATERIALCOPPER ALLOY BODY
MATTMATERIALSTEEL COMP 316 FILTERING MEDIUM
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONASTM B61 ASSN STD SINGLE MATERIAL RESPONSE BODY
MEDAMEDIA FOR WHICH DESIGNEDWATER
STYLIII STYLE DESIGNATORTWIN STRAINER W/BOLTED COVER



Thank you for visiting Just Parts Unlimited!

Thank You for Visiting! You Can Download the ASAP Semiconductor App On the Google Play Store and App Store to Get Updates On All of Our Latest Deals and Newest Parts.

Request for Quote

We use cookies to ensure that we give you the amazing experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top