H498-1-103-25C Part by Tecnotec Sarl with NSN 5340-01-095-5576 - Request a Quote Now

Part Number: H498-1-103-25C

Manufacturer: tecnotec sarl

NSN: 5340-01-095-5576

CAGE Code: F6033

NIIN: 010955576

Item Name : catch flush

INC Code: 20262

Country: USA

NCB Code: 01

FSG: 53 Hardware and Abrasives

FSC: 5340 Hardware Commercial

For competitive procurement options on part number H498-1-103-25C from Tecnotec Sarl (CAGE Code F6033), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number H498-1-103-25C Details:

Part number H498-1-103-25C is manufactured by Tecnotec Sarl and listed with the item name Catch Flush. Classified under NSN 5340-01-095-5576, the NIIN of this item is 010955576, its INC is 20262, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5340 Hardware Commercial. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for H498-1-103-25C

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part H498-1-103-25C with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number H498-1-103-25C with NSN 5340-01-095-5576, 5340010955576

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5340-01-095-5576 Item PartTypeName: CATCH,FLUSH	5340	010955576		P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				U
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
H498-1-103-25C	6	2	3

Characteristics Data of NSN 5340-01-095-5576, 5340010955576

MRC	Criteria	Characteristic
ABGL	WIDTH	1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM
ABRY	LENGTH	1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
ABTB	MOUNTING HOLE DIAMETER	0.125 INCHES NOMINAL
ADFX	CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH	1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
ADFY	CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH	0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
CZFT	BOLT OFFSET DISTANCE	0.025 INCHES NOMINAL
MATT	MATERIAL	STEEL CORROSION RESISTING OVERALL
STYL	STYLE DESIGNATOR	FLUSH LEVER ACTUATOR