HW428 Part by Texas Instruments Inc with NSN 5310-00-596-9785 - Request a Quote Now

Part Number: HW428

Manufacturer: texas instruments inc

NSN: 5310-00-596-9785

CAGE Code: 57057

NIIN: 005969785

Item Name : washer spring tensi

INC Code: 15938

Country: USA

NCB Code: 00

FSG: 53 Hardware and Abrasives

FSC: 5310 Nuts and Washers

For competitive procurement options on part number HW428 from Texas Instruments Inc (CAGE Code 57057), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number HW428 Details:

Part number HW428 is manufactured by Texas Instruments Inc and listed with the item name Washer Spring Tensi. Classified under NSN 5310-00-596-9785, the NIIN of this item is 005969785, its INC is 15938, and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 53 Hardware and Abrasives and Class (FSC) 5310 Nuts and Washers. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for HW428

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part HW428 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number HW428 with NSN 5310-00-596-9785, 5310005969785

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5310-00-596-9785 Item PartTypeName: WASHER,SPRING TENSION	5310	005969785		N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
				A	0
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
HW428	2	9	5

Characteristics Data of NSN 5310-00-596-9785, 5310005969785

MRC	Criteria	Characteristic
AAUB	HOLE DIAMETER	0.318 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
ABKV	OUTSIDE DIAMETER	0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM
ABKW	OVERALL HEIGHT	0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
ABPX	MATERIAL THICKNESS	0.007 INCHES MINIMUM AND 0.017 INCHES MAXIMUM
FEAT	SPECIAL FEATURES	SLOTTED AND BENT AT TWO POINTS ON OUTER CIRCUMFERENCE,180 DEGREES APART
MATT	MATERIAL	COPPER ALLOY 170 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE OVERALL