49A04315-1 Part by Thales Training And Simulation Inc with NSN 3120-01-212-9305 - Request a Quote Now

Part Number: 49A04315-1

Manufacturer: thales training and simulation inc

NSN: 3120-01-212-9305

CAGE Code: 06YY5

NIIN: 012129305

Item Name : bearing sleeve

INC Code: 13205

Country: USA

NCB Code: 01

FSG: 31 Bearings

FSC: 3120 Bearings Plain Unmounted

For competitive procurement options on part number 49A04315-1 from Thales Training And Simulation Inc (CAGE Code 06YY5), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number 49A04315-1 Details:

Part number 49A04315-1 is manufactured by Thales Training And Simulation Inc and listed with the item name Bearing Sleeve. Classified under NSN 3120-01-212-9305, the NIIN of this item is 012129305, its INC is 13205, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 31 Bearings and Class (FSC) 3120 Bearings Plain Unmounted. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 49A04315-1

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part 49A04315-1 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

NSN Information for Part Number 49A04315-1 with NSN 3120-01-212-9305, 3120012129305

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
3120-01-212-9305 Item PartTypeName: BEARING,SLEEVE	3120	012129305	0	N
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			A
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
49A04315-1	5	2	3

Characteristics Data of NSN 3120-01-212-9305, 3120012129305

MRC	Criteria	Characteristic
ABHP	OVERALL LENGTH	0.1350 INCHES MINIMUM AND 0.1450 INCHES MAXIMUM
ADAR	BODY OUTSIDE DIAMETER	0.1830 INCHES MINIMUM AND 0.1930 INCHES MAXIMUM
ADAS	BODY INSIDE DIAMETER	0.1250 INCHES MINIMUM AND 0.1260 INCHES MAXIMUM
ADZG	LUBRICATION MATERIAL	LUBRICATING OIL
AEPR	FLANGE OUTSIDE DIAMETER	0.2300 INCHES MINIMUM AND 0.2400 INCHES MAXIMUM
AGFF	FLANGE WIDTH	0.0290 INCHES MINIMUM AND 0.0330 INCHES MAXIMUM
BZLX	CORNER SHAPE	SQUARE ALL CORNERS
FEAT	SPECIAL FEATURES	OIL IMPREGNATED
MATT	MATERIAL	COPPER ALLOY OVERALL
STYL	STYLE DESIGNATOR	SOLID,EXTERNAL FLANGE ONE END