BACH7C0140CC Part by The Boeing Company with NSN 4720-01-050-3946 - Request a Quote Now

Part Number: BACH7C0140CC

Manufacturer: the boeing company

NSN: 4720-01-050-3946

CAGE Code: 81205

NIIN: 010503946

Item Name : hose assembly metallic

INC Code: 17972

Country: USA

NCB Code: 01

FSG: 47 Pipe Tubing Hose and Fittings

FSC: 4720 Hose and Tubing Flexible

For competitive procurement options on part number BACH7C0140CC from The Boeing Company (CAGE Code 81205), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number BACH7C0140CC Details:

Part number BACH7C0140CC is manufactured by The Boeing Company and listed with the item name Hose Assembly Metallic. Classified under NSN 4720-01-050-3946, the NIIN of this item is 010503946, its INC is 17972, and its NCB code is 01 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 47 Pipe Tubing Hose and Fittings and Class (FSC) 4720 Hose and Tubing Flexible. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for BACH7C0140CC

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part BACH7C0140CC with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 4720-01-050-3946, 4720010503946

MRC	Criteria	Characteristic
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND"
AAJD	THREAD CLASS	3B 1ST END"
AAJF	THREAD DIRECTION	RIGHT-HAND 1ST END"
AARX	INSIDE DIAMETER	0.350 INCHES NOMINAL"
ABJH	TEMP RATING	-65.0 DEG FAHRENHEIT AND 800.0 DEG FAHRENHEIT SINGLE RESPONSE"
ABKV	OUTSIDE DIAMETER	0.600 INCHES NOMINAL"
ACKH	MINIMUM INSIDE BENDING RADIUS	5.500 INCHES"
ADJL	INNER CONVEYING TUBE STYLE	ANNULAR CLOSE-PITCH CORRUGATED"
AHNC	CONNECTION STYLE	SWIVEL NUT, FLARELESS 1ST END"
AKUU	END CONNECTION DESIGN	STRAIGHT 1ST END"
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 1ST END"
CBBL	FEATURES PROVIDED	NUTS DRILLED FOR LOCKWIRE AND IDENTICAL ENDS"
CQBD	BURST TEST PRESSURE	5400.0 POUNDS PER SQUARE INCH"
CQCS	LAYER COMPOSITION AND LOCATION	1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE"
CQGM	MAXIMUM OPERATING PRESSURE	1800.0 POUNDS PER SQUARE INCH"
CQJX	NOMINAL THREAD SIZE	0.562 INCHES 1ST END"
CQRB	SEAT ANGLE	12.0 DEGREES 1ST END"
CRDW	HYDROSTATIC TEST PRESSURE	2700.0 POUNDS PER SQUARE INCH"
CRJM	OUTER COVERING ENVIRONMENTAL PROTECTION	CORROSION RESISTANT"
CRXX	MEASURING METHOD AND LENGTH	14.000 INCHES NOMINAL OVERALL"
FEAT	SPECIAL FEATURES	RETAINING WIRE CORROSION RESISTANT STEEL 321 PER AMS 5689 AND ONE CORROSION RESISTANT IDENTIFICATION BAND 1 IN. WIDE AND .012 IN. TO .020 IN. THICK"
THSD	THREAD SERIES DESIGNATOR	UNJF 1ST END"
AAGR	CROSS-SECTIONAL SHAPE STYLE	ROUND"
AAJD	THREAD CLASS	3B 1ST END"
AAJF	THREAD DIRECTION	RIGHT-HAND 1ST END"
AARX	INSIDE DIAMETER	0.350 INCHES NOMINAL"
ABJH	TEMP RATING	-65.0 DEG FAHRENHEIT AND 800.0 DEG FAHRENHEIT SINGLE RESPONSE"
ABKV	OUTSIDE DIAMETER	0.600 INCHES NOMINAL"
ACKH	MINIMUM INSIDE BENDING RADIUS	5.500 INCHES"
ADJL	INNER CONVEYING TUBE STYLE	ANNULAR CLOSE-PITCH CORRUGATED"
AHNC	CONNECTION STYLE	SWIVEL NUT, FLARELESS 1ST END"
AKUU	END CONNECTION DESIGN	STRAIGHT 1ST END"
AWLS	CONNECTION TYPE	THREADED INTERNAL TUBE 1ST END"
CBBL	FEATURES PROVIDED	NUTS DRILLED FOR LOCKWIRE AND IDENTICAL ENDS"
CQBD	BURST TEST PRESSURE	5400.0 POUNDS PER SQUARE INCH"
CQCS	LAYER COMPOSITION AND LOCATION	1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE"
CQGM	MAXIMUM OPERATING PRESSURE	1800.0 POUNDS PER SQUARE INCH"
CQJX	NOMINAL THREAD SIZE	0.562 INCHES 1ST END"
CQRB	SEAT ANGLE	12.0 DEGREES 1ST END"
CRDW	HYDROSTATIC TEST PRESSURE	2700.0 POUNDS PER SQUARE INCH"
CRJM	OUTER COVERING ENVIRONMENTAL PROTECTION	CORROSION RESISTANT"
CRXX	MEASURING METHOD AND LENGTH	14.000 INCHES NOMINAL OVERALL"
FEAT	SPECIAL FEATURES	RETAINING WIRE CORROSION RESISTANT STEEL 321 PER AMS 5689 AND ONE CORROSION RESISTANT IDENTIFICATION BAND 1 IN. WIDE AND .012 IN. TO .020 IN. THICK"
THSD	THREAD SERIES DESIGNATOR	UNJF 1ST END"