BMS1-11 Part by The Boeing Company with NSN 9320-00-099-6925 - Request a Quote Now

Part Number: BMS1-11

Manufacturer: the boeing company

NSN: 9320-00-099-6925

CAGE Code: 81205

NIIN: 000996925

Item Name : rubber sheet solid

Country: USA

NCB Code: 00

FSG: 93 Nonmetallic Fabricated Materials

FSC: 9320 Rubber Fabricated Materials

For competitive procurement options on part number BMS1-11 from The Boeing Company (CAGE Code 81205), look no further than Just Parts Unlimited. With the form presented on this page, you can submit information on your needs to receive tailored procurement solutions from our staff.

Part Number BMS1-11 Details:

Part number BMS1-11 is manufactured by The Boeing Company and listed with the item name Rubber Sheet Solid. Classified under NSN 9320-00-099-6925, the NIIN of this item is 000996925, its INC is , and its NCB code is 00 (USA).

For organization and identification purposes, this item is listed within the Federal Supply Group (FSG) 93 Nonmetallic Fabricated Materials and Class (FSC) 9320 Rubber Fabricated Materials. These details are important for confirming parts before making a purchase.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for BMS1-11

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor

Terms and Conditions

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

How to Get Started on Procurement

Complete an RFQ Form: Fill out this form for part BMS1-11 with details on your operational requirements, including your target quantity and expected turnaround time.
Wait for a Response: Our staff will quickly review the details you provide and reach out within 15 minutes or less to present options for your comparisons.
Make a Purchase: Once a purchase is made, you can expect our team to work closely with you each step of the way to ensure all needs are addressed.

Characteristics Data of NSN 9320-00-099-6925, 9320000996925

MRC	Criteria	Characteristic
ABGL	Width	30.000 INCHES NOMINAL
ZZZT	Nondefinitive Spec/Std Data	60 GRADE AND II TYPE
AASH	Minimum Tensile Strength	1125 POUNDS PER SQUARE INCH
MATT	Material	RUBBER
AASF	Nonmetallic Hardness Rating	55.0 MINIMUM SHORE DUROMETER A AND 65.0 MAXIMUM SHORE DUROMETER A
ZZZK	Specification/Standard Data	81205-BMS1-11 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
ADTX	Surface Condition	SMOOTH BOTH SIDES
MDCL	Material Document And Classification	BMS1-11, TYPE 2, GRADE 60, THE BOEING CO MFR REF SINGLE MATERIAL RESPONSE
ADZC	Environmental Protection	FUEL, AROMATIC AND LOW TEMPERATURE AND OIL RESISTANT AND OZONE RESISTANT AND WEATHER RESISTANT AND MILDEW RESISTANT
ABNM	Thickness	0.060 INCHES NOMINAL
MRC	Decoded Requirement	Clear Text Reply
ABRY	Length	60.000 INCHES NOMINAL